XL-PH10397SG - saf-holland

More documents

Recommendations

Info

Coupling Accessories TF-675 and TF-675-1 Dolly Master Application The Dolly Master TM provides a low-cost, efficient way to position converter dollies in the yard. The Dolly Master is an air-operated, truckmounted steel frame assembly that includes a vertical slide with guide ramps to which a 1.75˝ diameter coupling pin is attached. A double-acting air cylinder, which uses the truck’s air supply, raises and lowers the slide. A control valve is operated from within the cab. IMPORTANT: The Dolly Master is not intended for use in trailer spotting or coupling. TF-675 The Dolly Master can be bolted or welded to the tow vehicle. It has few moving parts so it’s easy to maintain. Up/Down cab control allows the driver to secure and release the dolly from within the cab. TF-675-1 VERTICAL SLIDE The stop mechanism holds the dolly tongue securely while repositioning the dolly. The air cylinder (not shown) actuates the slide by utilizing the tractor air supply. COUPLING PIN VERTICAL SLIDE TF-675 Mounting Dimensions XA-686 14.75" Replacements Parts XB-T-69-A 26.25˝ 8.50˝ 6.0˝ 12.00˝ XB-698 XB-0839 XB-E-540 XB-01996 XB-C-375-C-125 (4 REQ.) XA-694 XB-T-61 (4 REQ.) XA-687 XA-07839 TUBE (CYLINDER PROTECTION) XA-2524-R-12 XB-1031 TF-675-1 Mounting Dimensions The air cylinder (not shown) actuates the slide by utilizing the tractor air supply. The stop mechanism holds the dolly tongue securely while repositioning the dolly. 26.25˝ Weight: 116 lbs. COUPLING PIN 8.625˝ 6.00˝ 12.00˝ Capacities 390 lbs. (177 kg) Maximum Vertical Load 15,000 lbs. (6,800 kg) Maximum Gross Trailer Weight Replacements Parts XA-08370 XA-2524-R-13-1 XB-C-95 XB-T-69-C XA-2524-R-12 XA-08364 XB-T-61 (4 REQ.) TF-675 A B C D A B C D Maximum drawbar elevation range: 9˝ 12˝ usable stroke 14.75˝ total stroke Provide adequate clearance D A B C TF-675-1 A Maximum drawbar elevation range: 9˝ B 12˝ usable stroke C 14.75˝ total stroke D Provide adequate clearance XB-T-69-C XB-C-95 XA-08361 XB-05679-2 XB-698 XB-01996 Additional Information XB-E-540 XB-0839 XB-C-375-C-125 (4 REQ.) XA-08375 • For more product specific mounting information and operating instructions, refer to document number XL-PH-240-01. 58 XL-PH10397SG-en-US Rev C 02-2013 Amendments and errors reserved. © SAF-HOLLAND, Inc.
REFERENCE SECTIONS • Safety Information • Warranty • Coupling System Selection • Operating Conditions • Cushioning Systems • Mounting Information • Glossary
Page 1 and 2:
2013 HOLLAND COUPLING PRODUCTS PINT
Page 3 and 4:
Contents Reference Sections Part Nu
Page 5 and 6:
Part Number Index PART NUMBER XA-05
Page 7 and 8:
Coupling Products by Mounting Type
Page 9 and 10: PINTLE HOOKS • Combination Ball /
Page 11 and 12: Pintle Hooks - Rigid Mount PH-10RP4
Page 13 and 14: Pintle Hooks - Rigid Mount PH-30RP4
Page 15 and 16: Pintle Hooks - Swivel Mount (with S
Page 17 and 18: Pintle Hooks - Swivel Mount PH-760
Page 19 and 20: Pintle Hooks - Swivel Mount PH-775S
Page 21 and 22: Pintle Hooks - Rigid Mount - Air Cu
Page 29 and 30: COUPLERS TITLE HERE • FastLatch
Page 31 and 32: Coupler - Rigid Mount (Over-the-Roa
Page 33 and 34: Pin and Clevis Coupler - Swivel Mou
Page 35 and 36: Interchangable Assemblies Complete
Page 37 and 38: COUPLINGS INDUSTRIAL / GSE • Coup
Page 39 and 40: Coupler - Rigid Mount (Industrial /
Page 41 and 42: Coupler - Rigid Mount (Industrial /
Page 43 and 44: DRAWBAR EYES & TITLE HERE HINGE ASS
Page 45 and 46: Drawbar Eye Compatibilty S S R S S
Page 47 and 48: Drawbar Eyes - Rigid Mount Bolt-On
Page 49 and 50: Drawbar Eyes - Rigid Mount, Rectang
Page 51 and 52: Drawbar Eyes - Rigid Mount, Weld-On
Page 53 and 54: Drawbar Eyes - Swivel Mount Assembl
Page 55 and 56: Drawbar Eyes - Swivel Mount Assembl
Page 57 and 58: COUPLING ACCESSORIES • Drawbar Gu
Page 59: Coupling Accessories Pintle Hook We
Page 63 and 64: General Safety Information 17. Alwa
Page 65 and 66: Operating Conditions/Cushioning Sys
Page 67 and 68: Glossary ASTM American Society for
Page 69 and 70: THIS PAGE INTENTIONALLY LEFT BLANK
Page 71 and 72: They’re called “Original Parts
show all

XL-PH10397SG - saf-holland

Create successful ePaper yourself

Delete template?

Save as template?