XL-PH10397SG - saf-holland
XL-PH10397SG - saf-holland
XL-PH10397SG - saf-holland
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Drawbar Eyes – Swivel Mount Assembly<br />
DB-610-30 Weld-On Assembly<br />
• Steel block housing features close dimensional tolerances<br />
• Features grease zerk for easy lubrication<br />
DB-1249-49 Bolt-On<br />
• Forged, one-piece steel alloy drawbar<br />
• Heat treated for strength<br />
• I.D. of eye is induction hardened for wear resistance<br />
• Tested in accordance with SAE J847<br />
Replacement Parts<br />
XB-121<br />
XB-T-316-A<br />
XB-T-318<br />
XA-610-23<br />
XB-767<br />
DB-610-30<br />
DB-1249-49<br />
DB-610-30 Assembly<br />
3˝ Eye<br />
DB-1249-49 Drawbar<br />
3˝˝ Eye<br />
Rigid Tongue Trailers<br />
Hinged Tongue Trailers<br />
500 lb. Max. Vert. Load Weight<br />
Capacities lb. kg lb. kg lb. kg<br />
GTW<br />
VERTICAL<br />
GTW<br />
VERTICAL<br />
45,000<br />
9,000<br />
45,000<br />
9,000<br />
20,412<br />
4,082<br />
20,412<br />
4,082<br />
85,000<br />
500<br />
85,000<br />
500<br />
38,556<br />
227<br />
38,556<br />
227<br />
36 16.3<br />
24 10.9<br />
Additional Information<br />
• For off-road applications, reduce the published capacities by 25% and use with a rigid-mount coupling.<br />
• For additional specifications, refer to document <strong>XL</strong>-DB109 or <strong>XL</strong>-DB106.<br />
Mounting Dimensions<br />
17.125˝ REF.<br />
.38˝<br />
* See note below<br />
17.12˝<br />
6.25˝<br />
DIA.<br />
3˝<br />
DIA.<br />
4˝<br />
6.25˝<br />
DIA.<br />
3.00˝<br />
DIA.<br />
2˝<br />
1.63˝<br />
DIA.<br />
SECTION<br />
5.5˝ 6˝<br />
14˝<br />
3˝ (DEPTH )<br />
.38˝ * See note below<br />
1.63˝ DIA.<br />
SECTION<br />
5.50˝ 6˝<br />
14.00˝<br />
.38˝<br />
*NOTE: Minimum of 24 linear inches of .38˝ fillet<br />
weld required to develop rated capacity.<br />
NOTE: The mounting surface must have an adequate<br />
chamfer, as shown above, so that the drawbar<br />
mounts flush with the mounting surface.<br />
<strong>XL</strong>-<strong>PH10397SG</strong>-en-US Rev C 02-2013<br />
Amendments and errors reserved. © SAF-HOLLAND, Inc.<br />
53
Change language