XL-PH10397SG - saf-holland
XL-PH10397SG - saf-holland
XL-PH10397SG - saf-holland
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Drawbar Eyes – Swivel Mount Assembly<br />
DB-045BW1 Weld-On Assembly<br />
• Steel block housing features close dimensional tolerances<br />
• Features grease zerk for easy lubrication<br />
DB-045BS1 Bolt-On<br />
• Forged, one-piece steel alloy drawbar<br />
• Heat treated for strength<br />
• I.D. of eye is induction hardened for wear resistance<br />
• Tested in accordance with SAE J847<br />
Replacement Parts<br />
XB-121<br />
XB-T-316-A<br />
XB-T-318<br />
XB-767<br />
XA-610-23<br />
DB-045BW1<br />
DB-045BS1<br />
DB-045BW1 Assembly<br />
2.38˝ Eye<br />
DB-045BS1 Drawbar<br />
2.38˝ Eye<br />
Rigid Tongue Trailers<br />
Hinged Tongue Trailers<br />
500 lb. Max. Vert. Load Weight<br />
Capacities lb. kg lb. kg lb. kg<br />
GTW<br />
VERTICAL<br />
GTW<br />
VERTICAL<br />
45,000<br />
9,000<br />
45,000<br />
9,000<br />
20,412<br />
4,082<br />
20,412<br />
4,082<br />
85,000<br />
500<br />
85,000<br />
500<br />
38,556<br />
227<br />
38,556<br />
227<br />
38 17.2<br />
23 10.4<br />
Additional Information<br />
• For off-road applications, reduce the published capacities by 25% and use with a rigid-mount coupling.<br />
• For additional specifications, refer to document <strong>XL</strong>-DB131 or <strong>XL</strong>-DB132.<br />
Mounting Dimensions<br />
15.0˝ REF<br />
.38˝<br />
* See note below<br />
1.56˝<br />
15.0˝<br />
3.75˝<br />
Ø2.38˝<br />
8.5˝<br />
5.12˝<br />
4.00˝<br />
1.63˝<br />
2.38˝<br />
3.75˝ 6.00˝<br />
12.25˝<br />
3˝ (DEPTH)<br />
* See note below<br />
.38˝<br />
.38˝<br />
6˝<br />
Ø2.38˝<br />
CLEARANCE<br />
HOLE<br />
*NOTE: Minimum of 24 linear inches of .38˝ fillet<br />
weld required to develop rated capacity.<br />
NOTE: The mounting surface must have an adequate<br />
chamfer, as shown above, so that the drawbar<br />
mounts flush with the mounting surface.<br />
52 <strong>XL</strong>-<strong>PH10397SG</strong>-en-US Rev C 02-2013 Amendments and errors reserved. © SAF-HOLLAND, Inc.