XL-PH10397SG - saf-holland
XL-PH10397SG - saf-holland
XL-PH10397SG - saf-holland
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Drawbar Eyes – Rigid Mount, Weld-On<br />
DB-1400 and DB-1422<br />
• Forged, one-piece steel alloy drawbar<br />
• I.D. of eye is induction hardened for wear resistance<br />
• Tested in accordance with SAE J847<br />
DB-1400<br />
DB-1422<br />
Use with 3˝ channel or rectangular<br />
tube mounting configuration.<br />
Use with 3˝ channel<br />
or square tubing.<br />
Designed for 20° minimum<br />
and 60° maximum angle.<br />
Weld tabs can be heated and<br />
bent ± 10° to accommodate<br />
installation requirements.<br />
Designed for 30° angle.<br />
Rigid Tongue Trailers<br />
DB-1400<br />
2.38˝ Eye<br />
DB-1422<br />
2.38˝ Eye<br />
Hinged Tongue Trailers<br />
500 lb. Max. Vertical Load Weight<br />
Capacities lb. kg lb. kg lb. kg<br />
GTW<br />
VERTICAL<br />
GTW<br />
VERTICAL<br />
Additional Information<br />
90,000<br />
18,000<br />
90,000<br />
18,000<br />
40,824<br />
8,165<br />
40,824<br />
8,165<br />
120,000<br />
500<br />
120,000<br />
500<br />
• For off-road applications, reduce the published capacities by<br />
25% and use with a swivel-mount coupling.<br />
• For additional specifications, refer to documents <strong>XL</strong>-DB113 and <strong>XL</strong>-DB116.<br />
Mounting Dimensions<br />
54,432<br />
227<br />
54,432<br />
227<br />
14 6.4<br />
11 5<br />
1.63˝ DIA.<br />
2.38˝ DIA.<br />
2.88˝<br />
1.69˝<br />
5.63˝<br />
1.63˝<br />
2.38˝ DIA.<br />
1.69˝<br />
1.63˝<br />
26 LINEAR<br />
INCHES<br />
2.75˝<br />
5.62˝<br />
45°<br />
2.25˝<br />
.38˝<br />
1.56˝<br />
3.5˝<br />
4.0˝<br />
7.50˝<br />
.38˝<br />
32 LINEAR<br />
INCHES<br />
WILL<br />
ACCEPT<br />
20°- 60° CHANNE L<br />
SPREAD<br />
30°<br />
2.06˝<br />
48 <strong>XL</strong>-<strong>PH10397SG</strong>-en-US Rev C 02-2013 Amendments and errors reserved. © SAF-HOLLAND, Inc.