XL-PH10397SG - saf-holland
XL-PH10397SG - saf-holland
XL-PH10397SG - saf-holland
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Drawbar Eyes – Rigid Mount Bolt-On (Shank Mount)<br />
DB-1250-3 and DB-1249-2H<br />
• Forged, one-piece steel alloy drawbar<br />
• Heat treated for strength<br />
• I.D. of eye is induction hardened for wear resistance<br />
• Tested in accordance with SAE J847<br />
DB-1250-3<br />
Replacement Parts<br />
XB-T-60<br />
1.50˝ O.D. shank. 2˝ O.D. shank.<br />
XB-T-9N<br />
DB-1249-2H<br />
XB-121<br />
XB-T-316-A<br />
Replacement Parts<br />
XA-T-56<br />
XB-T-318<br />
DISCONTINUED<br />
Rigid Tongue Trailers<br />
DB-1250-3<br />
2.5˝ Eye<br />
DB-1249-2H<br />
3˝ Eye<br />
Additional Information<br />
Hinged Tongue Trailers<br />
500 lb. Max. Vertical Load Weight<br />
Capacities lb. kg lb. kg lb. kg<br />
GTW<br />
VERTICAL<br />
GTW<br />
VERTICAL<br />
15,000<br />
3,000<br />
45,000<br />
9,000<br />
6,804<br />
1,361<br />
20,412<br />
4,082<br />
50,000<br />
500<br />
85,000<br />
500<br />
• Not recommended for swivel mount applications.<br />
• When mounted, high clamp force is required to provide rated capacities.<br />
• For off-road applications, reduce published capacities by 25% and use with<br />
swivel-mount coupling.<br />
• For additional specifications, refer to documents <strong>XL</strong>-DB104 and <strong>XL</strong>-DB103.<br />
22,680<br />
227<br />
38,556<br />
227<br />
9 4<br />
14 6.4<br />
Mounting Dimensions<br />
DB-1250-3<br />
DB-1249-2H<br />
5.50˝<br />
DIA.<br />
1.25˝<br />
1.50˝<br />
2.50˝<br />
DIA.<br />
9.12˝<br />
1.50˝<br />
1.50˝- 6 UNC-2A<br />
THREAD<br />
1.53˝<br />
6.25˝<br />
DIA.<br />
1.63˝<br />
DIA.<br />
3.0˝<br />
DIA.<br />
1.75˝<br />
2˝-4.5 UNC-2A<br />
THREAD<br />
2.03˝<br />
.19˝x 45° *<br />
3.12˝ 3.25˝<br />
.15x<br />
45°*<br />
3.12˝<br />
10.51˝<br />
4.25˝<br />
*NOTE: The mounting surface must have an adequate<br />
chamfer, as shown above, so that the drawbar<br />
mounts flush with the mounting surface.<br />
44 <strong>XL</strong>-<strong>PH10397SG</strong>-en-US Rev C 02-2013 Amendments and errors reserved. © SAF-HOLLAND, Inc.
Change language