XL-PH10397SG - saf-holland

More documents

Recommendations

Info

Ball Hitch – Rigid Mount (Over-the-Road) BH-50 (Includes Ball and Receiver Assemblies) Application This ball hitch is ideal for heavy-duty over-the-road applications where high articulation (up to 30°) in all directions is required, and in applications where the vehicle and trailer remain coupled. The BH-50 minimizes chucking. Top-mounted adjustment ratchet provides easier coupling, uncoupling, and slack adjustment. Weld the receiver to the trailer frame or tongue. Mounting Dimensions 17.0˝ 13.5˝ 8.5˝ 1.75˝ 1.0˝ 1.75˝ 10.0˝ 6.5˝ 6.75˝ 3.25˝ 1.06˝ DIA . 4 MOUNTING HOLES 5.0˝ DIA. 4.12˝ The release includes a compression spring to aid in uncoupling. Steel bolt-on frame for ease of installation and strength. The tethered safety pin acts as a secondary lock. The 5˝ diameter steel alloy ball is precision machined, and heat treated for superior strength, durability and wear resistance. 6.0˝ 3.0˝ .5˝ .5˝ 3.25˝ 5.8˝ .5˝ NOTE: 2.5˝ 7/16˝ min . 19.75˝ TONGUE A minimum of 35 linear STRUCTURE inches of weld of the size noted is required to develop sufficient hitch strength. Weight: 135 lbs. (61.2 kg) 7/16˝ min. WELD ACROSS THE BOTTO M 7/16˝ min . BOTH SIDES Capacities 8,000 lbs. (3,630 kg) Maximum Vertical Load 80,000 lbs. (36,290 kg) Maximum Gross Trailer Weight Additional Information • For additional specification detail, refer to document number XL-PH254. Replacement Parts RECEIVER ONLY XA-04430 XB-02724 XB-PWM-38-78 XA-05264 XA-02234 XB-02745 XB-H-38 XA-02241 BALL ONLY XA-04108 XB-05514 D XA-02235 XB-21-S-250-1250 XB-C-375-C-150 XB-PWM-38-78 XA-02240 XB-639 XB-3547 XA-02721 SUB-ASSY. XA-05263 XA-04337 XB-02724 XA-05264 XB-05514 RK-06683 XB-21-S-250-1250 XB-PWM-38-78 XA-05263 XA-04337 34 XL-PH10397SG-en-US Rev C 02-2013 Amendments and errors reserved. © SAF-HOLLAND, Inc.
COUPLINGS INDUSTRIAL / GSE • Couplers • E-Hitch • Lunettes
Page 1 and 2: 2013 HOLLAND COUPLING PRODUCTS PINT
Page 3 and 4: Contents Reference Sections Part Nu
Page 5 and 6: Part Number Index PART NUMBER XA-05
Page 7 and 8: Coupling Products by Mounting Type
Page 9 and 10: PINTLE HOOKS • Combination Ball /
Page 11 and 12: Pintle Hooks - Rigid Mount PH-10RP4
Page 13 and 14: Pintle Hooks - Rigid Mount PH-30RP4
Page 15 and 16: Pintle Hooks - Swivel Mount (with S
Page 17 and 18: Pintle Hooks - Swivel Mount PH-760
Page 19 and 20: Pintle Hooks - Swivel Mount PH-775S
Page 21 and 22: Pintle Hooks - Rigid Mount - Air Cu
Page 29 and 30: COUPLERS TITLE HERE • FastLatch
Page 31 and 32: Coupler - Rigid Mount (Over-the-Roa
Page 33 and 34: Pin and Clevis Coupler - Swivel Mou
Page 35: Interchangable Assemblies Complete
Page 39 and 40: Coupler - Rigid Mount (Industrial /
Page 41 and 42: Coupler - Rigid Mount (Industrial /
Page 43 and 44: DRAWBAR EYES & TITLE HERE HINGE ASS
Page 45 and 46: Drawbar Eye Compatibilty S S R S S
Page 47 and 48: Drawbar Eyes - Rigid Mount Bolt-On
Page 49 and 50: Drawbar Eyes - Rigid Mount, Rectang
Page 51 and 52: Drawbar Eyes - Rigid Mount, Weld-On
Page 53 and 54: Drawbar Eyes - Swivel Mount Assembl
Page 55 and 56: Drawbar Eyes - Swivel Mount Assembl
Page 57 and 58: COUPLING ACCESSORIES • Drawbar Gu
Page 59 and 60: Coupling Accessories Pintle Hook We
Page 61 and 62: REFERENCE SECTIONS • Safety Infor
Page 63 and 64: General Safety Information 17. Alwa
Page 65 and 66: Operating Conditions/Cushioning Sys
Page 67 and 68: Glossary ASTM American Society for
Page 69 and 70: THIS PAGE INTENTIONALLY LEFT BLANK
Page 71 and 72: They’re called “Original Parts

XL-PH10397SG - saf-holland

Create successful ePaper yourself

Delete template?

Save as template?