XL-PH10397SG - saf-holland

Pin and Clevis Coupler – Swivel Mount (Over-the-Road)
PH-995SH71 (Non-Cushioned)
Application
A non-cushioned swivel-mount pin and clevis coupler designed for
over-the-road and off-road applications of drawbar style trailers.
Mounting Dimensions
19.16"
(486.7 mm)
12.53"
(318.3 mm)
Grease fitting for
easy lubrication.
‘Fish-mouth’
clevis head
helps guide the
drawbar into
position for
easier coupling
6.25"
(158.8 mm)
Ø 2.75"
(69.8 mm)
10.62"
(269.6mm)
A one-piece housing helps
keep contaminants out.
For added security, a safety pin
serves as a secondary lock.
Wear plates
in fish mouth
provide a
replaceable
wear surface
and minimize
drawbar ‘slop’.
Large 2.75˝ (70 mm) diameter
clevis pin reduces ‘slop’ between
the pin and drawbar eye.
6.25"
(158.8 mm)
6.63"
(168.4 mm)
8.25"
(209.6 mm)
6.50"
(165.1 mm)
4.77"
(121.3 mm)
4.14"
(105.3 mm)
15.34"
(389.6 mm)
10.56"
(268.3 mm)
Weight: 97 lbs. (44 kg)
Capacities
3,000 lbs. (1,360 kg) Maximum Vertical Load
100,000 lbs. (45,360 kg) Maximum Gross Trailer Weight
Replacement Parts
XB-T-993
XA-10287
XB-T-61
(4 REQ.)
XA-10008
(2 REQ.)
XB-T-992
XB-T-993
Drawbar Eye Dimensions
3˝ I.D. with a 1.63˝ diameter section.
Additional Information
• For severe off-road applications, reduce the above maximum
capacities by 25%. Not for use with a swivel-mount drawbar.
• For additional specification detail, refer to document number
XL-PH10412UM.
XB-10738
(4 REQ.)
XA-749-2
XB-T-993
XB-TLN-1000-7
XB-T-993-1
XB-0437
XA-782
XB-781-1
XB-780-1
Interchangeable with
PH-775-01552,
see page 33.
RK-10291
XA-10008
(2 Req.)
XB-10738
(4 Req.)
XB-T-61
(4 Req.)
XA-10287
XB-T-993
32
XL-PH10397SG-en-US Rev C 02-2013
Amendments and errors reserved. © SAF-HOLLAND, Inc.