XL-PH10397SG - saf-holland

Pin and Clevis Coupler – Swivel Mount (Over-the-Road)
PH-990ST71 (Rubber Cushioned)
Application
A special frame-mount, swivel style pin and clevis coupler featuring a
“fish mouth” head and rubber cushions for shock absorption. Designed
for extreme-duty in over-the-road and off-road applications.
Easy to maintain and
requires no lubrication.
Mounting Dimensions
23.28˝
8.00˝
4.00˝
Internal rubber
cushions provide
shock absorption.
For added security, a safety pin
serves as a secondary lock.
Weight: 160 lbs. (72.6 kg)
‘Fish-mouth’
clevis head
helps guide the
drawbar into
position for
easier coupling
Wear plates
in fish mouth
provide a
replaceable
wear surface
and minimize
drawbar ‘slop’.
The clevis pin is forged steel alloy
that is heat treated for strength,
durability, and wear resistance.
4.43˝1.50˝
2.00˝
18.23˝
13.80˝
10.28˝5.53˝ 2.28˝
11.61˝
9.88˝
4.94˝
4.00˝8.00˝
11.67˝
7.38˝
9 HOLES
FOR .75˝
DIA.
BOLTS
2.75˝
DIA.
Capacities
3,000 lbs. (1,360 kg) Maximum Vertical Load
100,000 lbs. (45,360 kg) Maximum Gross Trailer Weight
Drawbar Eye Dimensions
3˝ I.D. with a 1.63˝ diameter section.
Additional Information
• For severe off-road applications, reduce the above maximum
capacities by 25%. Not for use with a swivel-mount drawbar.
• For additional specification detail, refer to document
number XL-PH219.
Replacement Parts
XB-T-993
XA-10287
XB-T-61
(4 REQ.)
XA-10008
(2 REQ.)
XB-10738
(4 REQ.)
XB-T-992
XB-T-993
XB-T-993
XB-TLN-1000-7
XB-T-993-1
XB-0437
RK-T-551
Parts required for PH-990ST71
May also be used with PH-T-990
XA-T-361 XB-T-362
XA-10286
XB-T-307 (6 REQ.)
XB-770-1
XA-T-317-8
XA-T-361
XB-780-1
XB-T-306 (6 REQ.)
RK-10291
XA-10008
(2 Req.)
XB-10738
(4 Req.)
XB-T-61
(4 Req.)
XA-10287
XB-T-993
XL-PH10397SG-en-US Rev C 02-2013
Amendments and errors reserved. © SAF-HOLLAND, Inc.
31