XL-PH10397SG - saf-holland

Coupler – Rigid Mount (Over-the-Road)
CP-360
Application
A rigid mount coupler used for trailers and equipment in over-the-road
and off-road applications. Especially useful when frequent and automatic
coupling is desired, and when the weight of the drawbar makes it
impractical to lift. The latch automatically closes and locks upon coupling.
Mounting Dimensions
2.24˝
Body is cast steel alloy and
heat treated for strength.
To ensure long
life, grease
fittings are
provided for
easy lubrication.
Jaw is cast steel
alloy and heat
treated for
strength and
wear resistance.
1.50˝
10.13 ˝
10.00˝
8.50˝
5.50˝
2.75˝
Secondary lock for
added safety.
Bottom handle pull is
primary lock release.
2.38˝
6.44˝
4.75˝
8.75˝
Weight: 44 lbs. (20 kg)
.84˝
Capacities
3,000 lbs. (1,360 kg) Maximum Vertical Load
52,000 lbs. (23,590 kg) Maximum Gross Trailer Weight
Drawbar Eye Dimensions
2.50˝ to 3˝ I.D. with 1.25˝ to 1.63˝ diameter section.
Replacement Parts
.78˝ DIA.
6 HOLES
Additional Information
• For severe off-road applications, reduce the above maximum
capacities by 25% and use with a swivel-mount drawbar.
• For additional specification detail, refer to document number
XL-PH231.
XB-T-33-A
XB-T-377
XA-01154
XB-T-377
XB-767
XA-394
XA-07760
XA-393 XB-5
XB-T-20-2
XB-3094
XA-T-88
XB-767
XA-392
XA-T-88
XA-06101
XL-PH10397SG-en-US Rev C 02-2013
Amendments and errors reserved. © SAF-HOLLAND, Inc.
29