XL-PH10397SG - saf-holland

Pintle Hooks – Swivel Mount
PH-775-01552 (Lubricated)
Application
Mounting Dimensions
Heavy-duty construction for on- and off-road applications where a
significant amount of articulation is required.
Grease fitting for
easy lubrication.
Cast steel alloy latch is
heat treated for strength
and durability.
1.75˝
5.12˝
4.38˝
6.56˝ 8.44˝
6.25˝
4.50˝
2.25˝
A one piece housing
keeps contaminants
from entering the
pintle hook assembly.
2.25˝
4.50˝
6.25˝
Weight: 60 lbs. (27.2 kg)
Body and housing are forged from
special steel alloy and heat treated for
high strength, and wear resistance.
.94˝ DIA.
(4 HOLES)
3.25˝
3.25˝
6.50˝MIN. CLEAR AREA
2.25˝
Capacities
20,000 lbs. (9,070 kg) Maximum Vertical Load
100,000 lbs. (45,360 kg) Maximum Gross Trailer Weight
Drawbar Eye Dimensions
3˝ I.D. with 1.63˝ diameter section.
Additional Information
• For severe off-road applications, reduce the above maximum
capacities by 25%. Not for use with a swivel-mount drawbar.
• Tested in accordance with SAE J847.
• For additional specification detail, refer to document
number XL-PH246.
.28 X 45°
CHAMFER
6.50˝
4.00˝ DIA. HOLE
2.25˝
4.50˝
Replacement Parts
XB-E-552-1
XB-767-10
XB-757
XB-120-2
XB-127
4.50˝
.94˝ DIA.
(4 HOLES)
RK-775
LATCH KIT
XA-766-2Z
XB-781-1
The Holland PH-775-01552 complies with NOM-035-SCT-2-2010
Safety Specifications and Test Methods.
XA-749-2
XA-782
Interchangeable with
New PH-995SH71,
see page 33.
PH-775-01552-1
XA-199-4
XB-780-1
16
XL-PH10397SG-en-US Rev C 02-2013
Amendments and errors reserved. © SAF-HOLLAND, Inc.