WATER COOLED Datasheet.pdf - IMI Cornelius

PRODUCT DATA SHEET
Date: 23 rd July 2001
Issue No: 3
STANDARD PRODUCT OPTIONS
06 1 070302 has x1 python pump fitted
06 1 070303 has x2 python pumps fitted.
PERFORMANCE
Nominal icebank pull down:
(from water at 10 o C at 24 o C ambient):
Icebank weight:
Thermal capacity icebank
Maximum ambient temperature:
4 hours
34.5kg nominal
11558KJ (2760 Kcal)
35 o C
WATER COOLED
CLASSIC 1500
06 1 070302
06 1 070303
DIMENSIONS Base unit Discharge Unit
Height: 981mm 360mm
Width: 710mm 460mm
Depth: 600mm 280mm
Weight unloaded: 85kg 9kg
87kg packed
10kg packed
210kg operational 11kg operational
ELECTRICAL
Mains supply: 230v 1ph 50Hz. 24v 1ph 50Hz
Run current:
6 amps.
Start current:
27 amps.
Fuse:
10 amps.
Supply: Via 2m mains cable. Via 2.5mm cable from
3 pin UK style plug. base unit (supplied by installer)
REFRIGERATION
Compressor:
Compressor starting torque:
Compressor duty (-10 o C Evap temp):
Evaporator type:
Condenser type:
Expansion device:
Refrigerant type charge:
15cc
High starting torque
1155 watts
Copper tube 12.7mm diameter x 25.8m long
Water cooled brazed plate heat exchanger
Capillary tube 2m x 1.5m I.D.
R404a see rating plate for details
DISCHARGE UNIT
Heat exchanger:
Aluminium fins on copper tube.
Fan motor: Output: 12 watts
Speed:
1250 rpm
Direction:
clockwise shaft end
Protection:
thermal trip

WATER COOLED
CLASSIC 1500
06 1 070302
06 1 070303
DISCHARGE UNIT (continued)
Fan blade: Diameter: 250mm
Pitch:
31 o
Air flow direction: Blow – air passes over motor before fan
CONTROLS
Control types:
Other controls:
Global electronic icebank controller with 3 pin probe.
High temperature cut-out for compressor protection (mounted
on discharge line). System test switch.
Glycol high temperature protection (protects against over
condensing in cold weather)
PYTHON PUMP
Type & Pump motor:
Output:
Speed:
Protection:
Max flow rate @ no pressure:
Max lift @ min flow:
Connection size:
AGITATION
3-stage semi-submersible, Marchmay
97watts
2700rpm
thermal trip
24 litres per minute
17m
15mm diameter tube
Continuous agitation
ADDITIONAL INFORMATION
Product coils: Material: 316 stainless steel
Diameter: 9.5mm O.D.
Coil options: Length: 5m
Quantity: 14off
Fittings:
Standard kit includes x6 ball valves
Coolant System: Coolant – Monopropylene Glycol, mixture 30% glycol, 70% water.
Recirculation pump: 3 stage mag drive pump, Max lift @ min flow = 15m
COMPLIANCE TO STANDARDS AND LEGISLATION
All coolers comply with Brewers Society Code of Practice for Electrical Safety in Beer Dispense in License
Premises. Designed to EN60335 part1 (Safety of Household and Similar Electrical Appliances-General
Requirements) Product coils are made from 316 stainless steel. Product complies with the current EMC
Directive.
IMI Cornelius (UK) Limited
Rawson Spring Way, Riverdale Industrial Estate, Sheffield S6 1PG
Tel: +44 (0) 1142 855886 Fax +44 (0) 1142 321070
e-mail: pauld@corneliusuk.com
www.corneliusuk.com