Python Wire Rope - Wesco Industries Ltd.
Python Wire Rope - Wesco Industries Ltd. Python Wire Rope - Wesco Industries Ltd.
Wire Rope Python ® Construct-6 Boom Hoist- and Overhead Crane Rope 6-strand crush resistant high strength rope compacted design to increase strength MaxFlat compression for optimum sheave contact Up to 7/8 - 24 mm 6 F-V 1” - 26 mm and up 6 WS-V Python® Construct-6 types are available in right- and left hand lay. Ask for availability from stock. Boom Hoist Main Applications: High strength standard 6-strand rope for applications which require a crush resistant rope to be used on multiple layer winding systems; e.g. boom hoist on lattice boom mobile- and tower cranes. This rope has also shown remarkable performance gains as main hoist rope on port container cranes and on some overhead crane applications. Rope Characteristic: Python® Construct-6 is a swaged rope which is constructed from specialty made engineered and sized 6-strand wire rope. The basic wire rope is already manufactured with purpose intend to be compacted (or swaged) into the finished product. The degree of compacting is carefully selected to ensure the best compromise between crush- and fatigue resistance. The strength increase compared to standard 6-strand ropes varies between about plus 10% to 35% depending on rope diameter. Python® Construct-6 is available as a 25 wire (6 F-V) or 36 wire (6WS-V) construction, in left- and right lay, bright or galvanized. Choose 6 F-V as Boom Hoist rope, 6 WS-V for single layer drum hoisting. Because of the compacting process most of the rope’s initial stretch (constructional stretch) has already been removed. Python® Construct-6 is NOT rotation resistant or nonrotating Standard: DIN 2078/3051 where applicable. Do NOT use Python® Construct-6 wire rope attached to a swivel. The rope WILL unlay resulting in an unsafe condition. -22- Block Twisting (Cabling) will occur when used exceeding certain lifting heights. Call for advice
Wire Rope Breaking Strengths Note: The maximum CAPACITY, WORKING LOAD LIMIT (WLL), or LINE PULL of the rope usually is 1/5 of the below stated values. For specific information consult the standards applicable to your rope application. 6-strand compacted wire rope Construction: 6 F-V (up to 7/8” or 24 mm) 6 WS-V (1” / 26 mm and up) 6-strand rope with flat outer wire surface resisting drum crushing and aiding in better multiple layer spooling. Compacting removes most of constructional stretch. Rope dia. inch 5/16 7/16 1/2 Imperial Python ® Nominal Strength in tons of 2000 lbs EIPS 7.5 13.1 17.6 Construct-6 Weight per foot lbs .25 .44 .59 9/16 5/8 3/4 7/8 1-1/8 1-1/4 20.1 25.8 35.2 45.9 70.9 94.8 .68 .87 1.18 1.55 2.37 3.15 Rope dia. mm Metric Python ® Construct-6 Minimum Strength 1960 N/mm 2 kN tons of 2000 lbs Weight per mtr kgs Boom Hoist Rope Applications 8 9 10 67.1 82.2 98.3 7.5 9.2 11.0 .37 .46 .55 11 12 13 116.2 135.6 156.3 13.1 15.2 17.6 .65 .76 .87 14 15 16 178.5 202.5 229.9 20.1 22.8 25.8 1.01 1.13 1.29 Boom and Main Hoist Ropes 18 19 20 283.1 313.0 342.9 31.8 25.2 38.5 1.59 1.75 1.91 22 24 26 408.6 481.2 561.0 45.9 54.1 63.1 2.30 2.70 3.16 28 30 32 631.2 737.4 843.4 70.9 82.9 94.8 3.52 4.10 4.68 34 36 952.6 1061.8 107.1 119.3 5.34 6.03 Overhead Crane Applications -23-
- Page 1 and 2: 01/2004 PYTHON ® HIGH PERFORMANCE
- Page 3 and 4: Wire rope is a very complex machine
- Page 5 and 6: Quick Reference Python ® Super 8 P
- Page 7 and 8: Basic Information ® Wire Rope is a
- Page 9 and 10: Fundamentals of Wire Rope Inspectio
- Page 11 and 12: Wire Rope Construction Strength The
- Page 13 and 14: Wire Rope Construction Bending Fati
- Page 15 and 16: Wire Rope Construction Sheaves and
- Page 17 and 18: Wire Rope Breaking Strengths Note:
- Page 19 and 20: Wire Rope Breaking Strengths Note:
- Page 21 and 22: Wire Rope Breaking Strengths Note:
- Page 23: Wire Rope Breaking Strengths Note:
- Page 27 and 28: Wire Rope Breaking Strengths Note:
- Page 29 and 30: Wire Rope Breaking Strengths Note:
- Page 31 and 32: Non-Rotating Wire Rope Breaking Str
- Page 33 and 34: Non-Rotating Wire Rope Breaking Str
- Page 35 and 36: Non-Rotating Wire Rope Breaking Str
<strong>Wire</strong> <strong>Rope</strong><br />
<strong>Python</strong> ® Construct-6 Boom Hoist- and Overhead Crane <strong>Rope</strong><br />
6-strand crush resistant high strength rope<br />
compacted design to increase strength<br />
MaxFlat compression for optimum sheave contact<br />
Up to 7/8 - 24 mm<br />
6 F-V<br />
1” - 26 mm and up<br />
6 WS-V<br />
<strong>Python</strong>® Construct-6<br />
types are available in<br />
right- and left hand lay.<br />
Ask for availability from<br />
stock.<br />
Boom Hoist<br />
Main Applications:<br />
High strength standard 6-strand rope for applications which require<br />
a crush resistant rope to be used on multiple layer winding<br />
systems; e.g. boom hoist on lattice boom mobile- and tower<br />
cranes. This rope has also shown remarkable performance<br />
gains as main hoist rope on port container cranes and on<br />
some overhead crane applications.<br />
<strong>Rope</strong> Characteristic:<br />
<strong>Python</strong>® Construct-6 is a swaged rope which is constructed from<br />
specialty made engineered and sized 6-strand wire rope. The basic<br />
wire rope is already manufactured with purpose intend to be<br />
compacted (or swaged) into the finished product. The degree of<br />
compacting is carefully selected to ensure the best compromise<br />
between crush- and fatigue resistance. The strength increase<br />
compared to standard 6-strand ropes varies between about plus<br />
10% to 35% depending on rope diameter.<br />
<strong>Python</strong>® Construct-6 is available as a 25 wire (6 F-V) or 36 wire<br />
(6WS-V) construction, in left- and right lay, bright or galvanized.<br />
Choose 6 F-V as Boom Hoist rope, 6 WS-V for single layer drum<br />
hoisting.<br />
Because of the compacting process most of the rope’s initial stretch<br />
(constructional stretch) has already been removed.<br />
<strong>Python</strong>® Construct-6 is NOT rotation resistant or nonrotating<br />
Standard:<br />
DIN 2078/3051 where applicable.<br />
Do NOT use <strong>Python</strong>®<br />
Construct-6 wire rope<br />
attached to a swivel. The<br />
rope WILL unlay resulting<br />
in an unsafe condition.<br />
-22-<br />
Block Twisting (Cabling)<br />
will occur when used<br />
exceeding certain lifting<br />
heights.<br />
Call for advice
Change language