Circuit-breakers NZM1, 2, 3, 4 up to 2000 A - Moeller Electric Parts

For Moeller Electric Sales and Support call KMparts.com (866) 595-9616
Circuit-breakers, switch-disconnectors
10/98
Ordering
Diagnostics, communication
Description
Diagnostics and parameterization software (in situ)
PC software for direct connection to all new NZM circuitbreakers
with electronic releases (IEC and UL/CSA
devices) or for direct connection to the DMI module,
including the required connectionn cable.
Protection parameter: online display and curve display,
expoet option to curve programme “Moeller
CurveSelect”
Warning and release messages: reading of diagnostic
memory also in volt-free state.
Load currents: display and trend indication
Recording and export options to Excel for load currents
and diagnostic messages.
Configuration of the DMI: motor starter, remote
operator, assignment of the DMI inputs and outputs and
displays.
Data Management Interface (DMI Module)
Query of diagnostics and operational data, display of
currents, motor starter function, parameterisation and
control of the circuit-breaker with electronic release
Comprehensive remote diagnostic options and remote
operation via fieldbus in combination with a field Bus
connection.
Inclusive NZM-XDMI-CAB connection cable between
NZM and DMI (length: 2 m).
DEL ALT
ESC OK
NZM, easy
Expansion unit, networking
Interfacing to the DMI module for transfer of phase currents, parameter data, status
data and diagnostics data as well as the circuit-breaker position (wiring of
auxiliary contacts to DMI inputs).
DMI configuration via field bus.
Actuation of the DMI motor starter functions and the NZM remote operator (via
DMI outputs wiring).
Detection of digital inputs and actuation of the outputs via field Bus
Fieldbus interface: to PROFIBUS-DPV1 slave.
Can be operated with class 1 and class 2 masters.
Addresses available: 1 to 126
Fieldbus connection to CANopen
Addresses available: 1 to 127
Fieldbus connection to DeviceNet
Addresses available: 0 to 63
Switched-mode power supply unit
For DMI module
• Rated input voltage: 50/60 HZ: 115/230 V AC
• Rated output voltage (residual ripple): 24 V DC (g 3 %)
• Rated output current: 1.25 A
Telescopic adapter
For DMI module
For equalization of the mounting depth of rear mounting devices in CI enclosures
and cabinets
With 35 mm top-hat rail IEC/EN 60715, adjustable from
75 – 115 mm. Screw-on and snap fitting.
Part no.
Article no.
NZM-XPC-KIT
265631
NZM-XDMI612
260217
NZM-XDMI-DPV1
270333
EASY221-CO
233539
EASY222-DN
233540
EASY400-POW
212319
M22-TA
226161
Moeller HPL0211-2007/2008
Price
see price list
Std. pack
Notes
http://catalog.moeller.net
1 off Only suitable for use in conjunction
with circuit-breakers having
electronic releases.
Free-of-charge download of the
manual AWB1230-1459 and a
demo software at
www.moeller.net.
1 off Only suitable for use in conjunction
with circuit-breakers having
electronic releases.
Free download of manual
AWB1230-1441 at
www.moeller.net.
1 off Connected to the DMI module and
has the same contour appearance.
Replaces the DPV0 interface
1 off EASY204-DP.
1 off
1 off
1 off