Kenwood TH-D7A
Kenwood TH-D7A
Kenwood TH-D7A
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
1<br />
2<br />
3<br />
4<br />
5<br />
6<br />
7<br />
8<br />
9<br />
10<br />
11<br />
12<br />
CONNECTING <strong>TH</strong>E TRANSPORTER WI<strong>TH</strong> <strong>TH</strong>E HF<br />
TRANSCEIVER<br />
You can use the optional cables (PG-4R) to connect the<br />
Transporter with the HF transceiver. For these cables,<br />
contact your authorized KENWOOD dealer.<br />
Note:<br />
◆ Switch OFF both the Transporter and HF transceiver before making<br />
the connection.<br />
◆ The Transporter automatically transmits its call sign in Morse at<br />
regular intervals because of the legal requirement; therefore, transmit<br />
sidetone must be output from the HF transceiver. On TS-570D or<br />
TS-570S, do not select “OFF” in Menu 21. On TS-870S, use the<br />
MONI control to adjust the volume of sidetone.<br />
◆ When the Transporter is too close to the HF transceiver, unwanted<br />
feedback may cause malfunction.<br />
◆ Do not share a regulated power supply between the Transporter and<br />
the HF transceiver. Unwanted feedback may cause malfunction.<br />
GPS<br />
2.5 mm (1/10")<br />
3.5 mm (1/8")<br />
I/O<br />
unit<br />
I/O unit<br />
You need not worry about<br />
which end goes to which side<br />
13<br />
14<br />
15<br />
16<br />
17<br />
18<br />
3.5 mm (1/8")<br />
2-conductor plug<br />
HF transceiver<br />
COM connector<br />
EXT SP jack<br />
MIC connector<br />
19<br />
20<br />
21<br />
22<br />
You may install appropriate noise<br />
filters at the shown positions to<br />
prevent unwanted feedback from<br />
causing malfunction.<br />
23<br />
84
Change language