Kenwood TH-D7A

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
SELECTING BEACON TRANSMIT METHOD
Select the operation method for transmitting APRS data.
The table concludes how operations differ depending on
the selection:
1 Press [MENU] to enter Menu mode.
2 Press [2], [9] to select “2–9 (DATA TX)”.
STA CON
7 9
96 BCONDUP
3 Press [UP]/ [DWN] to select Manual (default), PTT, or
Auto.
5
STA CON
7 9
4 Press [OK] to complete the setting.
5 Press [MENU] to exit Menu mode.
5
96 BCONDUP
MANUAL
PTT
AUTO
E ach press of [ BCON]
transmits the APRS
data.
1 P ress
[ BCON]
to switch the function
ON.
• “BCON” appears and blinks.
2 Press
and hold the
PTT
switch, then
speak into the microphone.
3 Release
the
P TT
switch.
• Releasing the switch transmits the
APRS data.
• You cannot retransmit the APRS data
unless the time selected in Menu 2–7
(TX INTERVAL) passes. Wait until
“BCON” starts blinking to indicate
transmitting is ready.
4 To switch the function OFF, press
[ BCON] again.
1 P ress
[ BCON]
to switch the function
ON.
• “BCON” appears.
• Switching the function ON transmits the
APRS data once. After that, APRS data
is automatically transmitted at intervals
of the period selected in Menu 2–7 (TX
INTERVAL).
2 To switch the function OFF, press
[ BCON] again.
22
23
74