PDF-Download - Microsens

MICROSENS Enterprise Networks_Fiber To The Office Category_Multiport Switch Technology_Fast Ethernet
24 Port Fast Ethernet Switch
Enterprise networks
Modular 24 Port Fast Ethernet
Switch with 3 Modules
8 Port SC Duplex Module
100Base-FX
8 Port RJ-45 Module
10/100Base-TX
Benefits
Description
24 Fast Ethernet and
2 Gigabit Ethernet uplink ports
Modular design for copper and fiber
networks
High performance with 8.8 Gbps
backplane
Network management via SNMP /
RMON1 / Telnet / CLI / Web, stackable
up to 8 devices
Extensive features such as QoS,
VLAN, IGMP. RSTP etc.
The modular 24 port Fast Ethernet Layer 2+ switch is particularly suited for
the use in Fiber To The Office (FTTO) and Fiber To The Desk (FTTD) networks.
These fiber optic-based networks require a large number of active fiber optic
ports in the central distribution area.
On the front the switch has three modular slots each of which can be retrofitted
with 8 port modules. These modules come with eight 10/100-Base-TX copper
and eight 100Base-FX fiber optic ports. There are fiber optic port versions
available for multimode, single mode and single mode simplex.
At the rear of the switch there are two uplink ports which can be alternatively
used in the form of RJ-45 (10/100/1000Base-T) or SFP (1000Base-X) (Dual
Media). In addition to this, the network management of up to 8 switches can
be logically stacked.
Description
24 port Fast Ethernet L2+ Access switch chassis, 19“ 1 U, manageable,
3 Slots, 2x uplink 10/100/1000Base-T RJ-45 or 1000Base-X SFP
Art.-No.
MS400820M
Redundant Power Supply
8 port 10/100Base-TX Module, 8x RJ-45 MS400822
8 port 100Base-FX Module, 8x multimode 1310 nm SC duplex 2 km MS400823
8 port 100Base-FX Module, 8x single mode 1310 nm SC duplex 30 km MS400824
System Catalog 1610
40 MICROSENS