PDF-Download - Microsens

Enterprise Networks_Fiber To The Office Category_Switches Technology_Fast Ethernet
MICROSENS
Fast Ethernet Micro Twin Converter
Fast Ethernet
Micro Twin Converter
Enterprise networks
Benefits
Description
Fast Ethernet Micro Twin Converter
100Base-TX/100Base-FX for low
space requirement
Optional Power-over-Ethernet
according to IEEE 802.3af, max.
15.4 W per port
Bridge mode for speed adaptation
10/100 Mbps, half-/full-duplex
Hidden fiber port for high robustness
of the complete system
Applications
Cost effective connection of VoIP
telephones in Fiber To The Desk
(FTTD) networks
Retention of the dedicated ports in
the central distribution for each end
device
The increased number of applications of IP telephones primarily confronts the
user of Fiber To The Desk networks (FTTD) with the matter of active media
conversion. In FTTD networks, end equipment is directly fitted with fiber optic
ports and connected (dedicated) with the central building distributor. However,
IP telephones generally have twisted pair ports.
For this application, MICROSENS offers a Fast Ethernet Micro Twin Converter
with an optional Power-over-Ethernet (PoE) operation. The equipment contains
two Fast Ethernet Media Converters, independent of each other, for a typical
office environment with two work places. The conversion of the Fast Ethernet
signals is made within extremely short latency periods and is transparent.
Besides the standard version with an integrated 230 VAC power unit, there
is an extended version available with Power-over-Ethernet according to IEEE
802.3af. In this operation mode, end equipment can be supplied with data as
well as with power via the connected twisted pair cable. A maximum power of
15.4 W per port enables operation of all end equipment, conforming to standards,
such as IP telephones, wireless access point, IP cameras, etc.
Furthermore, the equipment can be switched to the bridging mode. In this case
a corresponding speed regulator, 10/100Base-TX, is achieved in addition to the
media conversion. The device is independent of network management and all
configurations for the converter, respectively bridge mode, as well as the PoE
settings are made via a DIP switch.
Description
Fast Ethernet Twin Converter, 2x 100Base-TX/100Base-FX,
multimode 1310 nm LC duplex
Standard
Version
MS450295
PoE Version
MS450295P-48
System Catalog 1610
Fast Ethernet Twin Converter, 2x 100Base-TX/100Base-FX,
multimode 1310 nm MT-RJ duplex
Fast Ethernet Twin Converter, 2x 100Base-TX/100Base-FX,
single mode 1310 nm LC duplex 15 km
MS450297
MS450294
48 VDC power supplies (for PoE version) see page 32, installation accessories see page 34.
MS450297P-48
MS450294P-48
www.microsens.com
29