PDF-Download - Microsens

MICROSENS
Metropolitan Networks_10G Platform Category_Management Technology_Software
Network Management
DCC via Backplane
Terminal with nmp
SNMP SNMP
TDM
Headquarters
Remote Management
TDM
NMP Management Software
Department
Up to
8 GBE switches
Benefits
Network remote configuration
Performance monitoring and
reporting
Optimal coordination of software
and hardware
Description
The network management platform (NMP) is a universal tool, which allows
monitoring and configuring all network devices of MICROSENS. The software
provides an easy to use graphical interface and several intelligent functions
which supports the administrators in his daily work. The network management
tool is working with device lists, which allow grouping the devices in a tree
structure. Depending on the organisation structure it is possible that one device
can belong to one or several groups. Therefore settings can be made globally
and be assigned to multiple devices simultaneously.
All MICROSENS devices are automatically detected by the discovery function.
Even devices without IP-address are listed and can be configured. The enhanced
SNMP functions allow managing all devices from the Enterprise Networks,
Industrial Solutions, Enterprise Access and Metro Networks with the same
tool. Furthermore the new management platform has an integrated topology
manager. With this devices can be placed graphically on any map and can be
connected together. With this it is possible to monitor also individual ports and
their connections beside the standard operation parameters.
Metropolitan networks
The MICROSENS 10G Platform can be managed through SNMP or the MICROSENS
Network Management Platform (NMP), which includes java-based GUI Terminal.
The management card has two Ethernet ports and one local RS232 port and is
hot swappable. The CLI is an intuitive Command Line Interface with embedded
help and automatic completion allowing complete management of the network
element (administration, alarms, configuration, monitoring, Inventory). The
CLI can be accessed locally through an RS232 port for initial configuration or
through a management network via an SSH connection.
The OSC Transponder is an Ethernet switch with three ports. The Ethernet
Switch has three electrical ports. The first one is connected to the backplane
connector to communicate with the MGNT board through the backplane. The
two other ports are connected to the two SFP interfaces which perform the
Electrical to Optical conversion.
System Catalog 1610
170 MICROSENS