PDF-Download - Microsens

MICROSENS
Enterprise Access_Modular Access Platform Category_Transponder Technology_Transparent_3R
4 Channel Optical Crossbar and
Wide Range Retimer Module
Crossbar Module
Benefits
Description
Insertion module with four SFP-slots
Free programmable logic for
“Any-to-any Port” switching
Full 3R signal regeneration mode
Data rates from 50 Mbps up
to 2.7 Gbps
Redundant operation for back-up
applications
Channel protection mode
Protocol transparent operation is
supported
Ideal as double xWDM transponder
for smallest footprint
The Optical Crossbar module is part of the MICROSENS access platform and
offers full 3R signal regeneration bundled with a free configurable crossbar
matrix for data rates from 50 Mbps up to 2.7 Gbps.
This module includes a flexible switchable crossbar logic. It allows free allocation
of four channels – besides the protection of the optical link.
Plenty of different applications are possible: Twin converter for point-to-point
links with high port density, hardware-redundant configuration, channel
protection and signal multiplication (Broadcast). It is possible to monitor the
status information of the SFP via the chassis management.
The Optical Crossbar converter is designed as a plug-in module card, which is
installed into MICROSENS modular converter system. A potential free alarm
contact, which can be used for the connection to external alarm systems, is a
further feature.
SNMP manageable via MICROSENS
NMP-Platform
Description
4 Channel Optical Crossbar + Wide Range Retimer Module from 50 Mbps up to
2.7 Gbps (FE, STM-1, SDI. STM-4, GBE, 1x/2x Fibre Channel, OC-48/STM-16)
SFP Modules can be found on page 132.
Art.-No.
MS416453MR
System Catalog 1610
122 MICROSENS