Controls

Folding the Seatback
To fold down the seatback, lift the
seatback latch release while folding the
seatback forward.
To raise the seatback, lift the seatback
latch release while raising the seatback
until it locks upright. Push and pull on the
seatback to check that it is locked.
Removing the Bench Seat
1. Make sure the seatback is in the
upright position, and that all safety
belts are on the seat.
2. Then lift the seatback latch release
while folding the seatback forward.
3. From behind the bench seat, pull up
the two rear levers, and lift the bench
seat.
4. Remove the bench seat from the
vehicle.
Replacing the Bench Seat
Don’t put the bench seat in so it faces
backward, because it won’t latch that way.
If you want more storage room behind the
seat, use the floor pins closer to the front
of the vehicle. See “Adjusting Rear Seats”
later in this section.
1. Place the front hooks of the bench seat
latch onto the front floor pins.
II ...