PMA series

2010.7
Compliant
www.cosel.co.jp/en
Unit type AC-DC Switching Power Supply
PMA series
For medical application use (Medical safety certification "EN60601/UL60601")
Unit type AC-DC converter
5 years warranty

Unit type
Medical
electric
equipment
Power
Factor
Correction
World wide
Safety
Approvals
EMI
Inrush
current
limiting
OCP OVP Remote
ON/OFF
PMA-series
Feature
For medical electric equipment
Internal dual fuses
Harmonic attenuator (Complies with IEC61000-3-2)
Universal input (AC85 - 264V)
Efficiency increased with synchronous rectification
technology (PMA60F, PMA100F)
Variety of option
Safety agency approvals
UL60601-1, C-UL (CSA-C22.2 No.601.1), EN60601-1
CE marking
Medical Device Directive
EMC Compliance : EN61204-3, EN61000-6-2
EN61000-4-2
EN61000-4-3
EN61000-4-4
EN61000-4-5 (Common mode Level4, Differential mode Level2)
EN61000-4-6
EN61000-4-8
EN61000-4-11
EMI
FCC-B, CISPR22-B, EN55011-B, EN55022-B, VCCI-B
5-year warranty (refer to Instruction Manual)

PMA series 15-100W
For medical application use Unit type AC-DC converter
(Medical safety certification "EN60601/UL60601")
¡Medical safety certifications
Medical safety certification "EN60601/UL60601" (*1).
With compatibility to various standards of major countries, investigation time and cost for
safety standard accreditation can be reduced.
*1: EN60601-1, UL60601-1, C-UL pending
¡Downsized
Fuse is built-in both L and N phases. And enforced insulation. Therefore, additional fuse
and insulation transformer are unnecessary, and thus downsizing the system is achieved.
¿Conventionally,
Power source without medical standard certifications
L
N
Switching control
Rectification, smooth
System
FG
Externally
· Fuse or breaker is necessary to both L and N phases.
· Insulation transformer is necessary.
Thus
System is bigger, heavier, and thus cost increase.
¿With PMA series,
Fuse (or breaker) and insulation
transformer are externally unnecessary.
PMA series (medical power supply)
L
N
Switching control
Rectification, smooth
System
FG
PMA series has
· Fuses are built-in at both L and N phases.
· Medical standard(enforced insulation) certification.
Thus
Therefore, additional fuse (or breaker) and insulation transformer
are externally unnecessary, and thus the system is downsized,
light-weighted, and the cost can be reduced.
3

New unit-type power
supply is provided for
medical application use.
¡Environmental load reduced
NEW
RoHS compliant
All models: harmonic attenuator (IEC61000-3-2)
Power factor improvement circuit is built-in in 60/100W, and lowering input capacity is
achieved.
¡various options
Respond various requests by options.
T : Vertical terminal block
T1 : Horizontal terminal block
N : With case cover
J1 : VH (J.S.T) connector
R : With remote control function (PMA60/100F)
Option
T1
Option
T
Normal
Option
N
¡Product lineup
PMA15F PMA30F PMA60F PMA100F
Model name
Input voltage
Harmonic attenuator
Output voltage
/current
Leak current(AC100V/240V)
Operating temperature
Input - Output
Isolation
Safety standard
Conducted noise
External dimension (cover excluded)
Input/output interface
3.3V
5V
12V
15V
24V
48V
Input - FG
Output - FG
AC 85-264V 50/60Hz
IEC61000-3-2 Harmonic attenuator
3A 6A 12A 20A
3A 6A 12A 20A
1.3A 2.5A 5A 8.5A
1A 2A 4A
-
0.7A 1.3A 2.5A
4.5A
- - - 2.1A
0.05mA / 0.1mA
0.09mA / 0.18mA
-10-70ª (Derating)
AC4,000V 1 min. Cut-off current=10mA,DC500V 50MΩ min(Room temp., normal humidity)
AC2,000V 1 min. Cut-off current=10mA,DC500V 50MΩ min(Room temp., normal humidity)
AC 500V 1 min. Cut-off current=25mA,DC500V 50MΩ min(Room temp., normal humidity)
UL60601-1, C-UL, EN60601-1 pending
FCC-B, VCCI-B, CISPR22-B, EN55011-B, Complies with EN55022-B
31(W)†78 (H) †103 (D) mm 31(W)†82 (H) †120 (D) mm 32(W)†82 (H) †135 (D) mm 34(W)†93 (H) †168 (D) mm
Connector (Normal : Tyco Electronics AMP, J.S.T.selectable) / Terminal block (selectable)
4