Pulmonary Medicine Service Design Guide - Office of Construction ...
Pulmonary Medicine Service Design Guide - Office of Construction ...
Pulmonary Medicine Service Design Guide - Office of Construction ...
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
PULMONARY MEDICINE SERVICE NOVEMBER 29, 2011<br />
General Waste<br />
General waste is generated in all spaces and is held in containers for collection and/or sorting.<br />
Recyclable Waste<br />
Methods for sorting, collecting, transporting and disposing <strong>of</strong> recyclable products must be specifically<br />
analyzed for each facility and location. The optional use <strong>of</strong> disposable and reusable products is an important<br />
consideration in recycling and waste disposal alternatives.<br />
Soiled Linen<br />
Soiled reusable linens may be generated in exam rooms, procedure spaces, Sleep Study Rooms, and patient<br />
and staff gowning areas. Soiled linens are collected in carts or hampers (depending on volume) and are held in<br />
soiled linen rooms or in linen carts in Soiled Utility Rooms pending transport to the laundry facility. Disposable<br />
linens are included with recyclable waste or medical waste as appropriate.<br />
Reusable Medical Equipment (RME)<br />
Reusable utensils and instruments which are used in patient care areas are handled in different ways within<br />
the <strong>Pulmonary</strong> <strong>Medicine</strong> <strong>Service</strong>. For <strong>Pulmonary</strong> Function test rooms they are pre-cleaned on the unit in a<br />
Decontamination Room; for Bronchoscopy procedures they are pre-cleaned on the unit in an Equipment<br />
Cleaning Room. For all other areas they are pre-cleaned in a Soiled Utility Room. Utensils and instruments<br />
which require sterilization prior to reuse are packaged for transport from their pre-cleaning areas to the Sterile<br />
Processing Department. Specific protocols for utensil and instrument reprocessing shall be confirmed with<br />
each individual facility.<br />
DESIGN STANDARDS<br />
SECTION 4 - PAGE 45