Batteriestecker - Atech Antriebstechnik

More documents

Recommendations

Info

Why Use of APP ® Recommended Crimp Tooling is so Important APP ® connectors are designed to achieve the highest levels of durability, reliability, and performance as shown on the connector data sheets. Crimp tooling is a critical link between the designed performance of an APP ® connector and the realization of that performance by our customers. As part of the connector design and testing process, APP ® recommends a limited number of crimp solutions that have proven to deliver the intended connector performance in a process that is repeatable. Only these solutions tested by APP ® are listed in the conditions of acceptability from safety agencies such as UL, CSA, and TUV. Use of tooling solutions not tested by APP ® can affect not only performance but safety agency approvals. Problems attributable to use of tools not recommended by APP ® include: Electrical and Thermal • High electrical resistance • Failure to realize designed current and voltage carrying capability • Overheating • Melting of connector housings Detail tooling charts are available at the end of each connector family (Powerpole ® , SB ® , etc.). Mechanical • Contacts not able to fit inside connector housings. • Contacts not seated properly in connector housings causing: shorts, intermittent circuits, abnormally high or low mating and unmating force, & low retention force of the contact in the housing. PP15-45 SB ® 50 & PP75 SBS ® SBE ® , SBX ® & SBO ® PP120, PP180, SB ® , ATS Applicators SBE ® , SBX ® & SBO ® Auxiliary 1309 Series PM1000G1 SBS ® 75 Auxiliary SBE ® , SBX ® & SBO ® Auxiliary SBE ® , SBX ® & SBO ® Auxiliary SECTION 4 Tooling TM0001 SBS ® 75 Auxiliary SBE ® , SBX ® & SBO ® Auxiliary TP0001 SBS ® 75 Auxiliary SBE ® , SBX ® & SBO ® Auxiliary 1387G1 & 1387G2 1368 All Data Subject To Change Without Notice www.andersonpower.com - 95 -
| 1387G1 & G2 Pneumatic Bench Tools | Versatile & heavy duty tools manufactured by Pico Tools, use fixed depth dies and spring bottom locators designed specifically to crimp APP ® contacts. Dies and locators are not interchangeable between the 1387G1 and the 1387G2. These pneumatic full cycle tools operate on clean and dry shop air pressures of 80 – 125 psi (5 – 8.6 BAR). See connector family tooling charts at the end of each section for the specific dies and locators recommended for crimping each contact. Dies and locators are available from Pico Tools for a variety of other terminal types including lugs, insulated terminals, and a variety of turned pin and socket contacts. 1387G1: #12 – 2/0 (4 – 70 mm²) Pico Tools Model 400-BHD Compatible with M22520/23 dies and locators 1387G2: #12 – 250 mcm (4 – 120 mm²) Pico Tools Model: 500-D Locator Die Locator Die 1391G1: Foot Pedal Control 1387G1 1387G2 TA0002: Air regulator / filter for pneumatic tools. Keeps air clean and dry for long lasting tool performance. Dial knob adjusts air pressure going to the tool. TA0002 1391G1 | 1368 Series Hydraulic Tools| The dieless 4 indent head crimps full cycle until a minimum hydraulic pressure is reached. Good for crimping nearly all APP ® contacts for wire sizes #4 – 4/0, 300mcm. The dieless system offers a highly flexible crimping system that does not require the purchase of separate dies and locators. Pressure based crimp depth allows these tools to be adapted to a broad range of large wire crimping needs including lugs, ring terminals, and splices. 1368: Hubbell VC7 dieless 4 indent tool with attached manual hydraulic pump. Tool includes a custom turret locator for positioning of PP120, PP180, SB ® 120, SB ® 175, SB ® 350 contacts. The innovative design provides two separate crimp positions for the PP180, SB ® 175 and SB ® 350 contacts. Both the tool and locator ship in black plastic carrying cases. SECTION 4 Tooling 1368-NL: Manufactured by DMC to APP ® specifications, this 4 indent head with attached manual hydraulic pump offers the same crimping performance as the 1368, but with the cost savings of not having a custom turret locator. Includes black plastic carrying case. 1368-B: The same 4 indent head as the 1368-NL is mounted to a battery powered tool for effortless crimping. Includes 2 lithium-ion batteries and charger as well as a black plastic carrying case. - 96 - www.andersonpower.com All Data Subject To Change Without Notice
Page 1:
Performed with Emotion Built by Int
Page 4 and 5:
SECTION 1 • Index & Product Selec
Page 6 and 7:
| Product Selection Worksheet | Pri
Page 8 and 9:
Derating vs. Ambient Temperature Ch
Page 10 and 11:
Q: Will the crimp tool I have for s
Page 12 and 13:
| Preventative Maintenance | Damage
Page 14 and 15:
Pulse (Surge) Current: Highest inst
Page 16 and 17:
| Volts • Amps • Ohms • Watts
Page 18 and 19:
| Scratch Pad | SECTION 1 Engineeri
Page 20 and 21:
| POWERPOLE FAMILY SELECTION GUIDE
Page 22 and 23:
Use the Same Housings for Wire, PCB
Page 24 and 25:
PP15-45 Silver Plated Power Contact
Page 26 and 27:
Powerpole ® Pak Connectors - PP15
Page 28 and 29:
Blindmate Pak Connector Ideal for p
Page 30 and 31:
| PP15-45 TEMPERATURE CHARTS | 60 P
Page 32 and 33:
PCB Mounting Staples PCB staples ar
Page 34 and 35:
PP75 Locking Dovetail Housings Offe
Page 36 and 37:
| PP75 SPECIFICATIONS | Electrical
Page 38 and 39:
Guide Housings for Vertical Mini Po
Page 40 and 41:
| PP120 SPECIFICATIONS | Electrical
Page 42 and 43:
Powerpole ® Connectors - PP180: up
Page 44 and 45:
| PP180 TEMPERATURE CHARTS | 60 PP1
Page 46 and 47:
Powerpole ® - Tooling Information
Page 48 and 49: | MULTIPOLE FAMILY SELECTION GUIDE
Page 50 and 51: SBS ® 50 SBE ® 320 - SBX ® 350 S
Page 52 and 53: SBS ® Connectors - up to 105 amps
Page 54 and 55: SBS ® Silver Plated Primary Power
Page 56 and 57: | SBS ® CONNECTOR TEMPERATURE CHAR
Page 58 and 59: T-Handle for SBS ® 75G The “T”
Page 60 and 61: SB ® 50 Connectors - up to 120 amp
Page 62 and 63: 55A Vertical Mini Powerclaw PCB Con
Page 64 and 65: Guide Housings for Vertical Mini Po
Page 66 and 67: SB ® 120 Silver Plated Wire Contac
Page 68 and 69: | SB ® 120 Accessories | Mounting
Page 70 and 71: SB ® 175 3 Pole Housings & Hardwar
Page 72 and 73: | SB ® 175 Accessories | Cable Cla
Page 74 and 75: SB350 ® Connectors - up to 450 Amp
Page 76 and 77: | SB ® 350 CONNECTOR TEMPERATURE C
Page 78 and 79: SB ® - Tooling Information Loose P
Page 80 and 81: SBE ® 80 / SBO ® 60 Connectors -
Page 82 and 83: | SBE ® 80 / SBO ® 60 CONNECTOR T
Page 84 and 85: Pin & Socket Contacts for PPMX Auxi
Page 86 and 87: | SBE ® 160 / SBX ® 175 CONNECTOR
Page 88 and 89: Powerpole ® Auxiliary Powerpole ®
Page 90 and 91: Retaining Pins Retaining pins are u
Page 92 and 93: SBE ® 320 DIN Standard Silver Plat
Page 94 and 95: Powerpole ® Auxiliary Powerpole ®
Page 96 and 97: Zip Cable Straps Zip cable straps a
Page 100 and 101: | 1309 Series Hand Tools| High qual
Page 102 and 103: Soldering The alternative to crimpi
Page 104 and 105: P/N Page # P/N Page # P/N Page # P/
Page 106 and 107: P/N Page # P/N Page # P/N Page # P/
Page 109: performed with emotion build by int
show all

Batteriestecker - Atech Antriebstechnik

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?