Batteriestecker - Atech Antriebstechnik

More documents

Recommendations

Info

| SB ® 120 Accessories | Mounting Clamp for SB ® 120 Mounting clamps can be used for fastening a SB ® 120 series housings to a panel. Fastening hardware not included. 2.38 1.75 Description --- Part Number --- Minimum Quantity ............................ 20 sets of 2 .... Panel Mount Bracket for SBS ® 50 1467G1 1.82 1.44 Cable Clamps Durable metal cable clamps securely hold cables to prevent accidental strain or pulls from dislodging wire or contacts from the housing. Cable clamps are recommended for solder terminated wires. 0.16 DIA. 4 Places 0.88 High X 1.88 Wide Panel Cutout Cable Size Min / Max Min / Max Description Inches O.D. mm O.D. - Part Numbers - Minimum Quantity .......................................................................... 50 .......... Bolt on for Discrete Conductor 0.70 to 0.23 17.7 to 5.8 981G1 Bolt on for Bundled Conductor 0.73 to 0.29 18.5 to 7.3 981G2 981G1 The given wire O.D. information is an estimate. Cable clamps should be evaluated for performance with the actual wire to be used. “T” Handle The “T” handle makes mating and unmating the connector easier. The non-conductive red plastic material is strong and safe. (2) Self tapping screws are used to secure the handle to the connector housing. Description ----------- Part Numbers ----------- Minimum Quantity .................................. 1,000 50 ......... Red “T” Handle + Hardware Bag - SB120-HDL-RED Red “T” Handle Only 113899P1 - #8 x 7/8” Screw (Order 2 Per Handle) H1120P43 - 981G2 SECTION 3 SB ® 120 Dust Cover Prevents dust and dirt from entering the mating interface of the connector when unmated. NOTE: Not a Hermetic Seal. Description ------ Part Numbers ------ Minimum Quantity ................................... 100 50 .... Dust Cover with Lanyard Strap, Black B02019P1 134G4 Slide cover over mating end. Reducing Bushings Use with contact part number 1319-BK or 6811G6-BK to allow a smaller wire to be used with the connector. Electrical capability is derated with smaller wire. Dimensions - ID - Contact Barrel Size Wire Size ---------- Part Numbers ---------- inches mm Minimum Quantity ....................................................... 2,000 1,000 100 ....................... #2 AWG [33.6 mm²] #4 AWG [21.2 mm²] 5919-BK - 5919 0.28 7.11 #2 AWG [33.6 mm²] #6 AWG [16 mm²] - 5920-BK 5920 0.23 5.84 #2 AWG [33.6 mm²] #10 - 8 AWG [5.3 - 8.4 mm²] 5921-BK 5921 0.18 4.57 [ 21.4 ] 0.84 ID Wire Entrance All Data Subject To Change Without Notice www.andersonpower.com - 65 -
SB175 ® Connectors - up to 280 Amps 2 Pole Wires sizes from #12 (3.3 mm²) to 1/0 (50 mm²) fit in the second to largest connector in the SB ® series. The 3 pole SB ® 175 adds an additional position for power or grounding. All Multipole wire connector housings are genderless and mate to themselves minimizing inventory and assembly complexity. 3 Pole • Silver Plated Wire Contacts up to 1/0 (50 mm²) Allows UL rated currents up to 280 amps • Chemical Resistant Housing Option Extends temperature range down to -40°C, while offering enhanced UV and chemical resistance | SB ® 175 ORDERING INFORMATION | SB ® 175 Standard Housings The second to largest SB ® housings work with wire contacts up to 1/0 AWG [50 mm²] as well as busbar contacts. Genderless design mates with itself. Mechanical keys are color coded. NOTE: SB175 black is keyless and can be mated with all other colors. • UL Rated for Hot Plugging up to 100 Amps Great for battery or other applications where the ability to interrupt circuits is required SECTION 3 SB ® 175 Voltage Color Description Code --- Part Numbers --- Minimum Quantity .......... 200 50 ... Yellow 12V 943-BK 943 Orange 18V 942-BK 942 Red 24V 949-BK 949 Gray 36V 940-BK 940 Blue 48V 941-BK 941 Black (Keyless) 80V 2-7252G11 - Brown 96V 940-BK 940 [ 55.6] 2.19 Bottom View [ 79.6 ] 3.13 [ 28.6 ] 1.13 [ 6.5 ] Ø 0.26 (2) PLC’S Material ID P = Chemical Resistant [ 11.3 ] 0.45 Mated Length SB ® 175 Chemical Resistant Housings Same features as the Standard SB ® 175 but molded in a chemical resistant PBT/ PC blend. Suitable for use to -40°C. Voltage Color Description Code ---- Part Numbers ---- Minimum Quantity ...... 200 50 ... Red 24V P949-BK P949 Gray 36V P940-BK P940 [ 133.4 ] 5.25 [ 25.4 ] 1.00 - 66 - www.andersonpower.com All Data Subject To Change Without Notice
Page 1:
Performed with Emotion Built by Int
Page 4 and 5:
SECTION 1 • Index & Product Selec
Page 6 and 7:
| Product Selection Worksheet | Pri
Page 8 and 9:
Derating vs. Ambient Temperature Ch
Page 10 and 11:
Q: Will the crimp tool I have for s
Page 12 and 13:
| Preventative Maintenance | Damage
Page 14 and 15:
Pulse (Surge) Current: Highest inst
Page 16 and 17:
| Volts • Amps • Ohms • Watts
Page 18 and 19: | Scratch Pad | SECTION 1 Engineeri
Page 20 and 21: | POWERPOLE FAMILY SELECTION GUIDE
Page 22 and 23: Use the Same Housings for Wire, PCB
Page 24 and 25: PP15-45 Silver Plated Power Contact
Page 26 and 27: Powerpole ® Pak Connectors - PP15
Page 28 and 29: Blindmate Pak Connector Ideal for p
Page 30 and 31: | PP15-45 TEMPERATURE CHARTS | 60 P
Page 32 and 33: PCB Mounting Staples PCB staples ar
Page 34 and 35: PP75 Locking Dovetail Housings Offe
Page 36 and 37: | PP75 SPECIFICATIONS | Electrical
Page 38 and 39: Guide Housings for Vertical Mini Po
Page 40 and 41: | PP120 SPECIFICATIONS | Electrical
Page 42 and 43: Powerpole ® Connectors - PP180: up
Page 44 and 45: | PP180 TEMPERATURE CHARTS | 60 PP1
Page 46 and 47: Powerpole ® - Tooling Information
Page 48 and 49: | MULTIPOLE FAMILY SELECTION GUIDE
Page 50 and 51: SBS ® 50 SBE ® 320 - SBX ® 350 S
Page 52 and 53: SBS ® Connectors - up to 105 amps
Page 54 and 55: SBS ® Silver Plated Primary Power
Page 56 and 57: | SBS ® CONNECTOR TEMPERATURE CHAR
Page 58 and 59: T-Handle for SBS ® 75G The “T”
Page 60 and 61: SB ® 50 Connectors - up to 120 amp
Page 62 and 63: 55A Vertical Mini Powerclaw PCB Con
Page 64 and 65: Guide Housings for Vertical Mini Po
Page 66 and 67: SB ® 120 Silver Plated Wire Contac
Page 70 and 71: SB ® 175 3 Pole Housings & Hardwar
Page 72 and 73: | SB ® 175 Accessories | Cable Cla
Page 74 and 75: SB350 ® Connectors - up to 450 Amp
Page 76 and 77: | SB ® 350 CONNECTOR TEMPERATURE C
Page 78 and 79: SB ® - Tooling Information Loose P
Page 80 and 81: SBE ® 80 / SBO ® 60 Connectors -
Page 82 and 83: | SBE ® 80 / SBO ® 60 CONNECTOR T
Page 84 and 85: Pin & Socket Contacts for PPMX Auxi
Page 86 and 87: | SBE ® 160 / SBX ® 175 CONNECTOR
Page 88 and 89: Powerpole ® Auxiliary Powerpole ®
Page 90 and 91: Retaining Pins Retaining pins are u
Page 92 and 93: SBE ® 320 DIN Standard Silver Plat
Page 94 and 95: Powerpole ® Auxiliary Powerpole ®
Page 96 and 97: Zip Cable Straps Zip cable straps a
Page 98 and 99: Why Use of APP ® Recommended Crimp
Page 100 and 101: | 1309 Series Hand Tools| High qual
Page 102 and 103: Soldering The alternative to crimpi
Page 104 and 105: P/N Page # P/N Page # P/N Page # P/
Page 106 and 107: P/N Page # P/N Page # P/N Page # P/
Page 109: performed with emotion build by int
show all

Batteriestecker - Atech Antriebstechnik

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?