Batteriestecker - Atech Antriebstechnik
Batteriestecker - Atech Antriebstechnik
Batteriestecker - Atech Antriebstechnik
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
| SB ® 50 CONNECTOR TEMPERATURE CHARTS |<br />
60<br />
SB ® 50<br />
Temperature Rise at Constant Current<br />
125<br />
SB ® 50<br />
Derating vs. Ambient Temperature<br />
Temperature (°C)<br />
50<br />
40<br />
30<br />
20<br />
10<br />
Temperature (°C)<br />
100<br />
75<br />
50<br />
0<br />
0 10 20 30 40 50 60 70 80 90<br />
Amperes Applied<br />
25<br />
0 10 20 30 40 50 60 70 80 90 100<br />
Amperes Applied<br />
6 AWG 8 AWG<br />
10 AWG 12 AWG<br />
6 AWG 8 AWG<br />
10 AWG 12 AWG<br />
60<br />
Mini Powerclaw<br />
Temperature Rise at Constant Current<br />
125<br />
Mini Powerclaw<br />
Derating vs. Ambient Temperature<br />
Temperature (°C)<br />
50<br />
40<br />
30<br />
20<br />
10<br />
Temperature (°C)<br />
100<br />
75<br />
50<br />
SECTION 3<br />
SB ® 50<br />
0<br />
0 10 20 30 40 50 60 70 80 90<br />
Amperes Applied<br />
SB50<br />
25<br />
0 10 20 30 40 50 60 70 80 90 100110<br />
Amperes Applied<br />
SB50<br />
NOTE: Temperature rise charts are based on a 25°C ambient temperature. Powerclaw charts are based on #8 AWG<br />
equivalent copper foil on board side, mated to #6 AWG conductor on wire side.<br />
| SB ® Accessories |<br />
“T” Handle<br />
The “T” handle makes mating and unmating the connector easier. The<br />
non-conductive red plastic material is strong and safe. (2) Self tapping<br />
screws are used to secure the handle to the connector housing.<br />
Description --------- Part Numbers ---------<br />
Minimum Quantity ............................... 1,000 50 ........<br />
Red “T” Handle + Hardware Bag - SB50-HDL-RED<br />
Hardware Bag (2 Screws) - 104G17<br />
Red “T” Handle Only 113899P1 -<br />
#8 x 5/8” Screw (Order 2 Per Handle) H1120P41 -<br />
Handle<br />
(2) Self-tapping<br />
Screws<br />
Connector<br />
Housing<br />
Dust Cover<br />
Prevents dust and dirt from entering the mating interface of<br />
the connector when unmated. NOTE: Not a Hermetic Seal.<br />
Description ---- Part Numbers ----<br />
Minimum Quantity .............................. 500 50 ...<br />
Dust Cover with Lanyard Strap, Red 113890P1 134G1<br />
Slide cover over<br />
mating end.<br />
- 60 - www.andersonpower.com<br />
All Data Subject To Change Without Notice