Unichiller in Desktop Housing - HUBER

More documents

Recommendations

Info

Decommissioning Safety notice and policy 34 Caution! - Injury to persons or property possible: - Danger of slippage due to contaminated floor and working area. - Danger of tipping due to insufficient stability. - Danger of electric shock due to faulty power connection. - Danger of burns at extreme temperatures if touched. - Danger of chemical burns of the eyes, skin or airway due to emission of dangerous vapours (with the appropriate thermal fluid). - Leakage of fluid remnants to be caught in a collecting vessel. Machine and floor contamination to be removed at once! All safety notices are essential and must be considered when working according to the operating manual! Switching off Set main switch (36) to “O”. Disconnect the thermostat from the power supply. Drain out cooling water (only with water cooled machines) Draining procedure: Customers drain valves to be closed so that no cooling water flows. Put a collecting vessel under the cooling water connections of the machine. Remove the closing cap on the cooling water drain. The water will begin to drain from the water connections. It is essential that the water is allowed to fully drain out to prevent danger of freezing during storage or transport! The drained off cooling water can be tipped down the normal drains. The draining of the machine can be accelerated by blowing a compressed air pistol against the cooling water connections.
Transport The unit is now decommissioned and ready for transportation. The original packing material should be used as far as possible, and the unit must always be transported in the upright position. Items such as the controller and sight glass should be protected from transport damage. The unit should not be transported on its rollers, or mounting feet. Supports of rectangular wooden beams appropriate for the weight should be used even when transported on a palette. When shipping the unit on a palette, it should be braced on four sides using wood or other suitable materials. Extra bracing and banding should be made according to the weight of the unit. Extra materials such as plastic wrap / sheeting, cardboard, and banding should be used as necessary. Disposal Thermal fluid which has spilled or leaked must be correctly disposed of. To minimise environmental pollution, please dispose of old temperature control machines only via suitably licenced and experienced disposal or recycling companies. 35
Page 1 and 2: Valid for: Operating manual Unichil
Page 3 and 4: Foreword Dear Customer, The Huber t
Page 5 and 6: Description of Safety and Informati
Page 7 and 8: Description Chillers are temperatur
Page 9 and 10: Safety Devices to DIN12876 - Low le
Page 11 and 12: Operating conditions Please make su
Page 13 and 14: Thermofluids We recommend the therm
Page 15 and 16: Display and operation Display LEDs
Page 17 and 18: Chapter 3: Connect the machine, fil
Page 19 and 20: Start up General All models must be
Page 21 and 22: Setting the over-temperature switch
Page 23 and 24: Draining the machine and an externa
Page 25 and 26: Data Communication Transmission for
Page 27 and 28: ´G´ General Command This command
Page 29 and 30: Chapter 5: First aid for a fault co
Page 31 and 32: Maintenance Danger! Prior to carrin
Page 33: Chapter 6: Taking the machine out o

Unichiller in Desktop Housing - HUBER

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?