Unichiller in Desktop Housing - HUBER
Unichiller in Desktop Housing - HUBER
Unichiller in Desktop Housing - HUBER
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Decontam<strong>in</strong>ation / Repair<br />
The user is responsible for mak<strong>in</strong>g sure that there are no hazardous materials either <strong>in</strong><br />
or on the unit. The level of decontam<strong>in</strong>ation should be appropriate to the amount and<br />
type of contam<strong>in</strong>ants on the unit. The user should refer to the appropriate MSDS<br />
<strong>in</strong>formation for advice.<br />
The decontam<strong>in</strong>ation should be done BEFORE outside personnel come <strong>in</strong>to contact with<br />
the mach<strong>in</strong>e, and BEFORE the unit is sent out for repair or test<strong>in</strong>g. The unit should be<br />
clearly labelled that it has been decontam<strong>in</strong>ated before it is sent.<br />
We have prepared a document to simplify this process. This is available <strong>in</strong> the appendix,<br />
and at our website www.huber-onl<strong>in</strong>e.com.<br />
Clean<strong>in</strong>g the surfaces<br />
A normal steel clean<strong>in</strong>g spray is suitable for clean<strong>in</strong>g the sta<strong>in</strong>less steel surfaces.<br />
Pa<strong>in</strong>ted areas should be carefully cleaned with a gentle detergent.<br />
Plug contacts<br />
Each socket has a protective cap belong<strong>in</strong>g to it. If a connector is not required, then it<br />
should be covered with this cap.<br />
32
Change language