Unichiller in Desktop Housing - HUBER

More documents

Recommendations

Info

´L´ Limit – Command This command transfers the set point value limits; Master query: „[M01L0Fllllhhhhpp\r„ llll = Low-Limit, lower set point limit (Format as above) **** = No change of the lower set point limit. hhhh = High-Limit, upper set point limit (Format as above) **** = No change of the upper set point limit. pp = Check sum \r = End-character CR. Slave response: „[S01L17llllhhhhuuuuoooopp\r„ llll = Low-Limit, lower set point limit (Format as above) hhhh = High-Limit, upper set point limit (Format as above) uuuu = Lower working-range limit. This limit is specific to the device and cannot be modified. The lower set point limit cannot be below the lower working range limit. oooo = Upper working range limit. This limit is specific to the device and cannot be modified. The upper set point limit cannot be above the upper working range limit. pp = Check sum \r = End-character CR. 28
Chapter 5: First aid for a fault condition The following sections can be found in this chapter: - Display Error Messages - Maintenance - Decontamination / Repair - Cleaning the surfaces - Plug contacts 29
Page 1 and 2: Valid for: Operating manual Unichil
Page 3 and 4: Foreword Dear Customer, The Huber t
Page 5 and 6: Description of Safety and Informati
Page 7 and 8: Description Chillers are temperatur
Page 9 and 10: Safety Devices to DIN12876 - Low le
Page 11 and 12: Operating conditions Please make su
Page 13 and 14: Thermofluids We recommend the therm
Page 15 and 16: Display and operation Display LEDs
Page 17 and 18: Chapter 3: Connect the machine, fil
Page 19 and 20: Start up General All models must be
Page 21 and 22: Setting the over-temperature switch
Page 23 and 24: Draining the machine and an externa
Page 25 and 26: Data Communication Transmission for
Page 27: ´G´ General Command This command
Page 31 and 32: Maintenance Danger! Prior to carrin
Page 33 and 34: Chapter 6: Taking the machine out o
Page 35 and 36: Transport The unit is now decommiss

Unichiller in Desktop Housing - HUBER

Create successful ePaper yourself

Delete template?

Save as template?