Renold Clutches & Couplings - casa sueca s.a.

PM Mill Motor Couplings
Mill motor coupling
Brakedrum
W
J
J
B
P
K1
=
H
=
GAUGE
POINT
Z
A
F
G
C
L1
Y L K
D1 N M
V
A
F
Brakedrums may be used in conjunction with the whole range of
PM couplings and may be bolted on either the driving flange or
flexible half side of the coupling, the recess - ŅA - locating on the
outside diameter of the coupling.
Recommended brake drums for each size of coupling are shown in
the table, but ŅV is adjustable to suit “Non-standard” applications.
Type PM-SDW dimensions table (Ingot Motor)
Coupling
Dimensions
Size Motor
A B C D1 F G H K K1 L L1 M N P V W MIN.Y MAX.Y Z
Frame hp rpm
mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm mm
Size
0.7 180M 12.7 956 187.3 168 2 54 171.4 157 15.3 100 90 42 70 84 28 112 250 36 27 51 3
180L 16 958 187.3 168 2 54 171.4 157 20.3 100 110 42 70 84 28 112 315 46 27 51 3
1.3 225L 26 730 215.9 178 2 64 196.8 181 18.7 125 110 55 90 84 28 112 315 46 38 64 3
3 250L 43 732 260.3 215 3 70 235 221 18.9 140 140 60 105 107 35 142 400 60 49 73 3
6 280M 63 734 260 231 3 86 240 222 23.5 155 180 75 120 107 35 142 500 81 50 85 3
280L 82 735 260 231 3 86 240 222 23.5 185 180 75 120 107 35 142 500 81 50 85 3
12 355L 123 590 338 284.5 3.5 109 312 280 23.5 205 180 95 135 132 40 172 500 102 72 109 3
400L 170 590 338 324.5 3.5 109 312 280 25.5 205 225 100 155 167 45 212 630 102 72 109 5
18 400LX 228 591 392 341 4 125 360 320 26 205 225 100 155 167 45 212 630 118 80 125 5
450L 300 592 392 341 4 125 360 320 26 215 225 110 170 167 45 212 630 118 80 125 5
The motor ratings are taken for Periodic Duty Classes S4 and S5, 150 starts per hour with a cyclic duration factor at 40%. For motors operating outside these
ratings, consult Renold Hi-Tec Couplings
RENOLD Hi-Tec Couplings. Tel: + 44 (0) 1422 255000 Fax: + 44 (0) 1422 320273 E-Mail: sales@hitec.renold.com
80