Renold Clutches & Couplings - casa sueca s.a.

Gearflex GFV
B1
A1
C1
F
L
C2
A2
B2
D
Coupling Power Torque Speed Bore A1 Bore A2 Dimensions Offset
Size /100rpm Nominal Max** Max* Min Max Min B1 B2 C1 C2 D F L Mass WR 2 Max
Kw Nm rpm mm mm mm mm mm mm mm mm mm mm mm kg kg m 2 mm
GFV15DA 14.9 1423 7100 46 14 75 20 60 98 49 47 152 8 104 9 0.019 0.8
GFV20DA 28.2 2693 5400 57 20 95 27 76 124 62 60 178 8 130 17.5 0.044 1.0
GFV25DA 48 4584 4800 78 27 110 27 102 148 77 75 213 9 161 30 0.107 1.2
GFV30DA 77.6 7411 4250 90 27 130 39 117 173 91 89 240 10 190 40 0.200 1.4
GFV35DA 128 12224 4000 110 39 155 39 143 201 106 104 279 12 222 64 0.446 1.7
GFV40DA 196 18718 3600 127 39 180 55 165 233 121 116 318 13 250 94 0.842 2.0
GFV45DA 312 29796 3290 145 55 200 55 191 262 135 130 346 17 282 128 1.350 2.3
GFV50DA 431 41161 2920 165 55 225 55 216 294 153 148 389 17 318 187 2.800 2.6
GFV55DA 578 55199 2630 185 55 250 55 241 324 175 164 425 17 356 245 3.940 3.0
GFV60DA 857 81844 2320 205 55 265 55 267 349 188 182 457 20 390 300 5.130 3.4
GFV70DA 1096 104668 2120 225 55 310 55 292 406 221 221 527 23 465 475 11.040 3.9
Ordering Code
Gearflex
Vertical Series
Size
GF V 25 DA
Double Engagement
* Maximum Bore - The maximum bores shown are absolute maximums. Under normal circumstances the boss to bore ratio should not be less
than 1.5 for standard applications. Consult Renold for overbore approval.
** Speed in excess of these shown may require additional balancing.
RENOLD Clutches and Couplings. Tel: + 44 (0) 29 20792737 Fax: + 44 (0) 29 20793004 E-Mail: couplings@cc.renold.com
46