08-Optical Tables.pdf - Qioptiq Q-Shop

Optical Tables
Custom Configurations
In addition to custom built Optical Table
Tops, LINOS also supplies support systems
and vibration-isolation systems modified
or built to client specifica tions. Here are
a few examples of what we are able to
supply:
Height adjustments
Support systems may be optionally
equipped with height adjustments that
will allow leveling Table Tops supported
on highly uneven floors.
Non-standard materials
Support systems fabricated from
client-specified mate rials, e.g., fabricated
entirely from non-magnetic mate-rial, are
available on special order.
Non-standard finishes, such as paintwork
meeting ultra- stringent cleanroom-compatibility
requirements, are also available.
Non-standard support-system heights
If none of the broad range of standard
heights proves suitable, LINOS Photonics
will supply any type of support system in
client-specified heights.
Gimbal Piston TM vibration-isolation
systems with greater load-bearing
capacities
Gimbal Piston TM vibration-isolation
systems may be supplied in greater
load-bearing capacities if applications
should require
All of our Optical Table Tops are
manufactured entirely in one plant. This
greatly simplifies our supplying modified
standard tables or custom table designs.
Illustrated below are several examples of
Optical Tables and coup led assemblies
built to customer specifications.
Joined tables
Optical Table Tops are available in
modular versions that may be joined
together.
These have one or more of their
sidewalls replaced by precision coupling
mechanisms welded onto their structures.
All tables equipped with coupling
mechanisms are assembled and tested as
units in the plant prior to disassembly for
shipment. Optical tables equipped with
coupling mechanisms may be joined in
order to provide very large table surfaces
and/or L-, T-, or X-shaped assemblies.
Once assembled, joints created by joining
tables are sealed using the metal strips
provided.
All tables with thicknesses of 200 mm or
more may be coupled together to form
arbitrary configurations.
Coupling mechanisms must be welded
onto table struc-tures during manufacture.
They cannot be retro fit ted.
Custom ports and cut-outs
In addition to our standard Laserport, we
also supply modified tables having larger
diameter ports, rectan gular ports, and/or
cut-outs.
We can also equip modified tables with
studs and/or adapter plates for use in
coupling them to other tables, or mating
them to existing facilities or equipment.
Special materials
Optical Tables may be fabricated from
alternative struc tural materials, if
required by specialized applications. The
special structural materials typically used
are non- magnetic stainless steels,
aluminum alloys, and super invar, any of
which may also be used in fabricating
Clean-Top sealing caps, honeycomb cores,
sidewalls, and/or bottom plates.
Coupled Optical Tables, one with custom ports
Custom-shaped Optical Table fabricated from
super invar
Optical Tables
Phone numbers: Germany +49 551 69 350
France +33 47 25 20 420
333