Ziamatic Corp

3098 QUIC-LIFT Portable Tank System
PAGE 3-54
TRUCK END VIEW
FULL EXTENDED DOWN
POSITION
ZICO ® QUIC-LIFT Portable Tank System brings
the portable tank to you
Now you can quickly retrieve portable tanks from over side compartments
without unnecessary stretching or straining. At the flick of a
switch, our revolutionary Portable Tank System lowers any standard
30-inch high collapsible tank to a convenient height for removal.
Consisting of two high-strength aluminum casting sets and 12-volt
linear actuators, the PTS is easily installed onto new or existing
tankers. The electrically operated system requires a minimum shelf
width of 8-1/4”. Twenty-one inches (10-1/2” per device) shelf space
must be added to collapsed length of portable tank when calculating
mounting requirement.
Portable tank in storage position
At the flick of a switch, the tank is
lowered for easy removal
FEATURES:
• Easy to install on new or existing
tankers
• Uses only 12-volts...no hydraulic
fittings to fuss with
• Controlled by a two-pole doublethrow
momentary switch
• Flashing light kit provided to
signal when the device is in motion
• Self-locking in any position
• May be raised or lowered
manually in the event of electrical
failure
Pat. No’s. 5,405,234 & D359,712
SPECIFICATIONS:
• Constructed of high-strength,
light-weight cast aluminum
• Powered by two durable electric
actuators
• Requires 12-volt, 30 amp
electrical source
• Requires mounting surface equal
to length of collapsed tank plus
21” (10-1/2” per device)
• Tank box will hold portable tank
up to 30” high by 8” wide
collapsed
See models available on
page 3-55
PTS-TCH (Tank Cover Hardware) - We provide the mounting hardware only. The protective cover is provided
by the apparatus manufacturer. Maximum weight of portable tank and cover not to exceed 300 lbs.