Ziamatic Corp

3085 QUIC-MOUNT ® Pike Pole Holders
PAGE 3-23
ZICO Pike Pole holders can be used with most pike poles, closet hooks and similar round handled tools.
Holders are made of cast aluminum with a polyurethane coating or chrome plating to protect your tools and provide
several years of maintenance-free service.
Parts PPMB-C, PPMB-DS and PPMB-DD have cables and pins to hold tools securely. Holders are sold as
individual pieces. Two holders are required for all tools.
Single tool holders - Parts A and
C normally used on handle with
the head fitting into parts B, D or
DS. Two part C’s may be used
on closet hooks or other poles
having a “D” handle on one end
and a pike head on the other end.
PPMB-A
PPMB-B
PPMB-C
PPMB-D
PPMB-DS
Double tool holders - Mount two
tools side by side. Part AA holds
the handle while parts BB or DD
retain the head.
PPMB-AA PPMB-BB PPMB-DD
MODEL DESCRIPTION
WT./@
IN LBS.
PRICE LIST
PAGE NO.
PPMB-A Ring bracket - painted .6 18
PPMBC-A Ring bracket - chrome plated .5 18
PPMB-B Fork bracket - painted .4 18
PPMBC-B Fork bracket - chrome plated .4 18
PPMB-C Pole bracket - painted .5 18
PPMBC-C Pole bracket - chrome plated .4 18
PPMB-D Vertical fork - painted .4 18
PPMBC-D Vertical fork - chrome plated .4 18
PPMB-DS Dickie bracket - painted .4 18
PPMBC-DS Dickie bracket - chrome plated .4 18
PPMB-AA Double ring - painted 1.0 18
PPMBC-AA Double ring - chrome plated 1.0 18
PPMB-BB Double fork - painted .7 18
PPMBC-BB Double fork - chrome plated .6 18
PPMB-DD Double Dickie - painted .7 18
PPMBC-DD Double Dickie - chrome plated .7 18
Opening size of holders:
PART OPENING WIDTH
A
1-7/8”
B
1/2”
C
1-3/8”
D
1/2”
DS
1-1/8”
AA
1-7/8”
BB
1/2”
DD
1-1/8”
See page 3-20 (QUIC-MOUNT ® tool clips) for alternate tool holders.
Replacement cable and pin assemblies available, see page 3-25.