Ziamatic Corp

3015 QUIC-SEAT ® Cushioned Back Rest
PAGE 3-3
Cushioned Back Rest Seat mounts above and behind existing seat cushions,
providing the ultimate in firefighter comfort
The seat frame is constructed of one-half inch plywood to assure extra strength
and stability. Molded foam is applied to the frame and covered with a 48-ounce
heavy-duty vinyl Prefixx finished fabric.
The seat has been designed with short side supports to easily accommodate the
hip harness assembly on your SCBA. This design keeps the harness recessed so
as not to protrude into the firefighter’s back.
Model CBR-____-B
Seats are available in two widths (18” and 20”). The 20” wide seat is recommended
for the Scott 4.5 and Interspiro SCBA due to the width of their SCBA
cylinder support assembly.
Two head rest heights are available (3-1/2” and 6”). The shorter 3-1/2” head rest
reduces helmet interference.
Mounting brackets are provided for attaching the seat cushion to any flat surface.
Brackets are pre-drilled for mounting of WALKAWAY bracket, which must be
ordered separately.
Reference Manual 3015PM2
Model CBR-____-____-SHR
Short Head Rest
MODEL
DESCRIPTION
WT./@
IN LBS.
PRICE LIST
PAGE NO.
CBR-18-B 18” W seat, 6” head rest, black 8.3 13
CBR-20-B 20” W seat, 6” head rest, black 8.2 13
CBR-18-B-SHR 18” W seat, 3-1/2” head rest, black 8.0 13
CBR-20-B-SHR 20” W seat, 3-1/2” head rest, black 7.9 13
CBR-20-G-SHR 20” W seat, 3-1/2” head rest, gray 7.9 13
CBR-CR Cable release kit .3 13
Mounting brackets included
Optional Equipment:
CBR-CR
Cable release is used with the Mechanical
Walkaway bracket. Cable runs up back of
cushion and comes to the front between the
head rest and side cushion. The release ring is
above and to the right of the firefighter.