9. centria's concept series concealed fastner wall panel ... - 5tco.com
9. centria's concept series concealed fastner wall panel ... - 5tco.com 9. centria's concept series concealed fastner wall panel ... - 5tco.com
CONCEPT SERIES ® ONE THEME INFINITE POSSIBILITIES
- Page 2 and 3: CONCEPT SERIES ® CONCEALED FASTENE
- Page 4 and 5: CS-210 5.6" 12" 7/8" CS-260 1.6" 12
- Page 6: CS-610 9.6" 16" 7/8" CS-200 9.6" 12
- Page 9: 800.759.7474 Or visit our website a
CONCEPT SERIES ®<br />
ONE THEME<br />
INFINITE POSSIBILITIES
CONCEPT<br />
SERIES ®<br />
CONCEALED FASTENER<br />
PREFORMED METAL<br />
WALL SYSTEM<br />
Until recently, preformed metal <strong>wall</strong><br />
<strong>panel</strong>s offered designers a choice<br />
between only corrugated or ribbed<br />
profiles. The limited choices left<br />
little room for variety. But times<br />
have changed. CENTRIA has<br />
developed CONCEPT SERIES* to<br />
give you unprecedented design<br />
flexibility in preformed <strong>panel</strong>s.<br />
OUT OF ONE, MANY…<br />
CONCEPT SERIES is <strong>com</strong>posed<br />
of variations on a single theme – a<br />
dynamic, asymetrical profile. From<br />
this profile, CENTRIA designed a<br />
<strong>series</strong> of six interchangeable <strong>panel</strong><br />
configurations – three 12” wide, and<br />
three 16” wide – that can be installed<br />
vertically or horizontally.<br />
CONCEPT SERIES gives you<br />
unlimited new custom metal<br />
<strong>wall</strong> design possibilities.<br />
*Patent Pending
CS-200<br />
<strong>9.</strong>6"<br />
12"<br />
7/8"<br />
CS-260<br />
1.6"<br />
12"<br />
7/8"
CS-210<br />
5.6"<br />
12"<br />
7/8"<br />
CS-260<br />
1.6"<br />
12"<br />
7/8"
CS-620<br />
5.6"<br />
16"<br />
7/8"<br />
CS-660<br />
1.6"<br />
16"<br />
7/8"
CS-610<br />
<strong>9.</strong>6"<br />
16"<br />
7/8"<br />
CS-200<br />
<strong>9.</strong>6"<br />
12"<br />
7/8"
INNOVATIVE ENGINEERING<br />
COMPLEMENT YOUR BEST CONCEPTS WITH THESE OPTIONS<br />
CONCEPT SERIES <strong>concealed</strong> fastener<br />
<strong>panel</strong>s feature increased <strong>panel</strong> engagement<br />
for a tighter joint that’s virtually invisible.<br />
A unique, <strong>concealed</strong> fastening clip design<br />
allows unimpeded thermal movement and<br />
creates a full 1/2” cavity without shims or<br />
Concealed Clip<br />
Fastener –<br />
Standard<br />
MICROLINE extrusion details – Engineered specifically for use with<br />
CONCEPT SERIES <strong>panel</strong>s, these slim 2” extruded aluminum details are<br />
used to create narrow, crisp site lines around windows and doors and<br />
at the base and head of <strong>wall</strong>s, and for transitions at inside and outside<br />
corners and at vertical joints.<br />
subgirts, between the backside of the <strong>panel</strong><br />
and the air and water barrier – a critical<br />
feature for effective moisture control in<br />
MICROSEAM ® corners – Designed for use with CONCEPT SERIES<br />
<strong>panel</strong>s, these corners use a cutting edge structural bonding technique<br />
MicroLine extrusions<br />
simple rainscreen design.<br />
For vertical, soffit, or other applications<br />
where thermal movement is less critical,<br />
CONCEPT SERIES <strong>panel</strong>s may be<br />
ordered with optional <strong>concealed</strong><br />
extended fastener legs.<br />
Concealed<br />
Extended<br />
Fastener Leg –<br />
Optional<br />
to create the cleanest, continuous mitered corner assembly with no<br />
unsightly welds or pop rivets. MicroSeam corners are manufactured<br />
from the same coated coil as the adjacent <strong>panel</strong>s to guarantee a<br />
perfect match.<br />
DURALLURE ® finish – This affordable unpainted steel provides the natural<br />
beauty of bare metal through a new metallurgical process utilizing a highly<br />
PANEL END TRANSITIONS – Horizontal CONCEPT SERIES <strong>panel</strong> ends<br />
can be transitioned using overlaps or slim 2" MicroLine ® extrusions that<br />
eliminate exposed fasteners.<br />
corrosive-resistant aluminum/zinc alloy.<br />
SUBSTRATES, FINISHES AND COLOR – The standard CONCEPT SERIES<br />
substrate is G90 galvanized steel. Optional substrates include Galvalume ®<br />
MicroSeam corners<br />
Overlap<br />
steel , stainless and aluminum. A wide variety of finish systems and a full<br />
palette of colors including micas and metallics are available to meet specific<br />
aesthetic and corrosion resistance requirements. For <strong>com</strong>plete information,<br />
consult CENTRIA.<br />
MicroLine<br />
extrusion<br />
Durallure finish<br />
www.CENTRIA.<strong>com</strong>
800.75<strong>9.</strong>7474<br />
Or visit our website at<br />
www.CENTRIA.<strong>com</strong><br />
1005 Beaver Grade Road<br />
Moon Township, PA 15108-2944<br />
412.29<strong>9.</strong>8000; Fax: 29<strong>9.</strong>8317