Hand-Held Applicators - Henkel Content Management System
Hand-Held Applicators - Henkel Content Management System Hand-Held Applicators - Henkel Content Management System
Integrated Manual Dispenser 97003/97004 The Manual Dispenser Controller in combination with the Vari-Drop TM applicator (97131) has been designed for applying beads, for potting and for “by-eye” deposits. These dispensing systems are reliable, low cost pneumatic systems for dispensing fluids. Each system includes a 2 litre pressure reservoir that is designed for use with a hand-held applicator. These units have 0.05-0.7 bar (1-10 psi) (97003) or 0.3-7 bar (4-100 psi) (97004) pressure regulators, suitable for low viscosity (1500mPas) fluids, respectively. The reservoirs accommodate all Loctite ® bottles in 250ml, 500 g, 1 litre, and 2 kg packages. Operation of this unit is easy. The operator will place a bottle of product in the reservoir and tighten the three handles on the lid. The unit is then pressurised to the appropriate setting for optimal flow control. The product is dispensed through a hand-held applicator. The amount dispensed can be set by adjusting the flow screw on the finger switch or adjusting pressure. Typical Fluids Handled: Cyanoacrylate adhesives, light curable adhesives and anaerobic adhesives. Technical Specifications: Air Input max. 8 bar (116 psi), filtered to a maximum of 50µm Air Output 97003: 0.05-0.7 bar (1-10 psi) 97004: 0.3-7 bar (4-100 psi) Max. distance from system to dispensing point Dimensions (W x H x D): Weight 2m 360 x 335 x 235mm 6.5kg Features: • Eliminates waste and reduces operator fatigue • Easy to read pressure gauge • Adjustable pressure regulator Selector Chart: System Viscosity Range (mPas) Item # IDH No. Integrated Manual Dispenser 0-1500 97003 135546 1000-10000 97004 135547 Hand-held applicator 0-1000 97131 194420 500-5000 97111 88642 6
Integrated Semi-Automatic Dispensing System 97008/97009 The Integrated Semi-Automatic Dispensing System is a compact unit providing time-controlled dispensing when combined with an appropriate Loctite ® dispensing valve. The system provides digital control of dispensing time within the range 0.1-99.9 seconds. The controller can be actuated by a footswitch or finger switch . It is also capable of operating in a continuous mode for bead dispensing applications. The reservoir accommodates Loctite ® bottles in 250ml, 500g, 1 litre, and 2kg packages. The semi-automatic Dispensing System is required to be connected to an external electrical and pneumatic supply. Reservoir pressure and dispensing time can be set independently of each other. An uncovered bottle of Loctite ® product is placed directly into the integrated reservoir, and the reservoir lid is clamped in place. The reservoir is then pressurised using clean, filtered dry air. Air within the reservoir will push down on the liquid in the bottle and force it through the product feedline to the dispensing valve. The amount of product dispensed is controlled by three main factors: The pressure in the reservoir, the length of time the dispensing valve remains open, and the dispensing needle size. 97009: The “empty” signal is indicated as blinking text “U” on the digital display of the controller. In addition it is signalled by an audible alarm. Additional features: Voltage free output signals for empty and ready signalling. These can be connected to a higher ranking controller. Technical Specifications: Power Supply 90-260 VAC; 47-63 Hz Power Consumption 25W Air Input min. 5 bar (70 psi), max. 10 bar (145 psi), filtered to a maximum of 10 µm Air Output 97008: 0.3-7 bar (10-100 psi) Dimensions (W x H x D) 360 x 335 x 235mm 97009: 0.1-4 bar (3-60 psi) Weight 7.5kg Features: • Integrated design for simple setup and space economy. • Precision pressure regulator (0.1-4 bar) for reliable dispensing, eliminating air pressure fluctuation (97009) • Pressure displayed by pressure gauge 0-4 bar (97009) or 0-10 bar (97008) respectively • Timer-controlled solenoid valve for air-actuated applicator • Level sensor to give empty warning (97009) Selector Chart: System Description Item # IDH No. Integrated Semi-Automatic Dispensing without low level sensing 97008 215844 System with low level sensing 97009 215845 Accessories: Item # IDH No. Foot Switch 97201 88653 Airline Filter / Regulator 97120 88649 See pages 18-23 for Dispense Valve selection. 7
- Page 1 and 2: Equipment Sourcebook 3rd edition
- Page 3 and 4: R A B - + 6 1 7 2 P Start ESC 8 3 9
- Page 5: All Purpose Syringe Dispensing Syst
- Page 9 and 10: Semi-Automatic Controller 97102 The
- Page 11 and 12: 0.5 Litre Reservoir 97106/97125 Thi
- Page 13 and 14: 300ml Cartridge Pusher 97631 The 30
- Page 15 and 16: Robot Configurations: Description I
- Page 17 and 18: Advancing Slide 97118/97119 The Adv
- Page 19 and 20: Hand-Held Applicator 97111/97112 Lo
- Page 21 and 22: Stationary Applicator Valve 97113/9
- Page 23 and 24: Fluid Compatibility Selector Chart
- Page 25 and 26: Preamplifier for Pressure Based Flo
- Page 27 and 28: Air Filter System, stationary 97603
- Page 29 and 30: Dual Rotor Pump Dispenser 97504 The
- Page 31 and 32: VoluBrane Pump 97643/97643 PAS The
- Page 33 and 34: Hand-Held Applicators for Two Compo
- Page 35 and 36: 300ml Cartridge Dispenser (electric
- Page 37 and 38: 900ml Dual Cartridge Pneumatic Disp
- Page 39 and 40: Additional Dispensing Tips and Acce
- Page 41 and 42: Loctite ® 7700 Hand-held LED Light
- Page 43 and 44: LED Line Array System 97067/97068 T
- Page 45 and 46: Accessories: UV Protection Enclosur
- Page 47 and 48: UV Conveyor System The Loctite ® U
- Page 49 and 50: Index by IDH numbers IDH No. WWC No
- Page 51 and 52: WWC No. IDH No. Product Description
Integrated Semi-Automatic Dispensing <strong>System</strong> 97008/97009<br />
The Integrated Semi-Automatic Dispensing <strong>System</strong> is a compact unit providing time-controlled dispensing when<br />
combined with an appropriate Loctite ® dispensing valve. The system provides digital control of dispensing time within<br />
the range 0.1-99.9 seconds. The controller can be actuated by a footswitch or finger switch . It is also capable of<br />
operating in a continuous mode for bead dispensing applications. The reservoir accommodates Loctite ® bottles in<br />
250ml, 500g, 1 litre, and 2kg packages. The semi-automatic Dispensing <strong>System</strong> is required to be connected to an<br />
external electrical and pneumatic supply. Reservoir pressure and dispensing time can be set independently of each<br />
other. An uncovered bottle of Loctite ® product is placed directly into the integrated reservoir, and the reservoir lid is<br />
clamped in place. The reservoir is then pressurised using clean, filtered dry air. Air within the reservoir will push down<br />
on the liquid in the bottle and force it through the product feedline to the dispensing valve. The amount of product<br />
dispensed is controlled by three main factors: The pressure in the reservoir, the length of time the dispensing valve<br />
remains open, and the dispensing needle size.<br />
97009: The “empty” signal is indicated as blinking text “U” on the digital display of the controller. In addition it is<br />
signalled by an audible alarm.<br />
Additional features: Voltage free output signals for empty and ready signalling. These can be connected to a higher<br />
ranking controller.<br />
Technical Specifications:<br />
Power Supply 90-260 VAC; 47-63 Hz Power Consumption 25W<br />
Air Input<br />
min. 5 bar (70 psi),<br />
max. 10 bar (145 psi),<br />
filtered to a maximum of 10 µm<br />
Air Output<br />
97008: 0.3-7 bar (10-100 psi) Dimensions (W x H x D) 360 x 335 x 235mm<br />
97009: 0.1-4 bar (3-60 psi)<br />
Weight<br />
7.5kg<br />
Features:<br />
• Integrated design for simple<br />
setup and space economy.<br />
• Precision pressure regulator<br />
(0.1-4 bar) for reliable dispensing,<br />
eliminating air pressure fluctuation<br />
(97009)<br />
• Pressure displayed by pressure<br />
gauge 0-4 bar (97009) or 0-10 bar<br />
(97008) respectively<br />
• Timer-controlled solenoid valve<br />
for air-actuated applicator<br />
• Level sensor to give empty<br />
warning (97009)<br />
Selector Chart:<br />
<strong>System</strong> Description Item # IDH No.<br />
Integrated Semi-Automatic Dispensing without low level sensing 97008 215844<br />
<strong>System</strong><br />
with low level sensing 97009 215845<br />
Accessories: Item # IDH No.<br />
Foot Switch 97201 88653<br />
Airline Filter / Regulator 97120 88649<br />
See pages 18-23 for Dispense Valve selection.<br />
7