Hand-Held Applicators - Henkel Content Management System

Integrated Manual Dispenser 97003/97004
The Manual Dispenser Controller in combination with the Vari-Drop TM applicator (97131) has been designed for
applying beads, for potting and for “by-eye” deposits. These dispensing systems are reliable, low cost pneumatic
systems for dispensing fluids. Each system includes a 2 litre pressure reservoir that is designed for use
with a hand-held applicator. These units have 0.05-0.7 bar (1-10 psi) (97003) or 0.3-7 bar (4-100 psi) (97004)
pressure regulators, suitable for low viscosity (1500mPas) fluids, respectively.
The reservoirs accommodate all Loctite ® bottles in 250ml, 500 g, 1 litre, and 2 kg packages.
Operation of this unit is easy. The operator will place a bottle of product in the reservoir and tighten the three handles
on the lid. The unit is then pressurised to the appropriate setting for optimal flow control. The product is dispensed
through a hand-held applicator. The amount dispensed can be set by adjusting the flow screw on the finger switch
or adjusting pressure.
Typical Fluids Handled: Cyanoacrylate adhesives, light curable adhesives and anaerobic adhesives.
Technical Specifications:
Air Input
max. 8 bar (116 psi),
filtered to a maximum of 50µm
Air Output
97003: 0.05-0.7 bar (1-10 psi)
97004: 0.3-7 bar (4-100 psi)
Max. distance from system
to dispensing point
Dimensions (W x H x D):
Weight
2m
360 x 335 x 235mm
6.5kg
Features:
• Eliminates waste and reduces
operator fatigue
• Easy to read pressure gauge
• Adjustable pressure regulator
Selector Chart:
System Viscosity Range (mPas) Item # IDH No.
Integrated Manual Dispenser 0-1500 97003 135546
1000-10000 97004 135547
Hand-held applicator 0-1000 97131 194420
500-5000 97111 88642
6