Hand-Held Applicators - Henkel Content Management System

Custom Equipment Solutions
In addition to the large variety of Loctite ® standard dispensing and curing equipment, Henkel also offers custom-built equipment
solutions to suit specific customer needs. Henkel engineers work closely with customers to make sure that the correct selection
of adhesive is achieved and the optimum process equipment is implemented into the production line. The Henkel total systems
approach ensures optimal compatibility of Loctite ® products with the customers‘ manufacturing processes. Our experience and
the unique partnership between our customers, our local sales engineers and our application and equipment engineering staff
guarantee the highest level of expertise in the field of adhesive applications.
Systems:
• Customised Silicone / MS Polymer Systems • Ready-to-use dispensing, curing and handling systems
• Customised Cartridge Systems • Robotic and X-Y-Z systems for dispensing adhesives and sealants
• UV Curing Systems
Silicone / MS Polymer System
This system is used for dispensing high viscosity Loctite ®
silicone or MS products from 20 litre / 25 kg open-top pails.
Dispensing capability from other containers on request.
An air motor drives the extrusion pail pump. The product outlet
pressure is regulated by controlling the motor air pressure.
Product is conveyed from the pump through a reinforced,
moisture impermeable high-pressure hose (maximum length
10m) to the fluid pressure regulator. This regulator brings
the high delivery pressure down to the operating pressure
required for dispensing, damping the pressure peaks that are
created by the pail pump. The product, regulated to operating
pressure, is conveyed through a high pressure feedline to an
applicator valve or eccentric rotor pump.
Twin pail pumps, 200 litre pail pumps and heated pail pumps
are also available. Twin Pail Pumps 200 Litre Pail Pump
Twin Cartridge System for 300/850ml Cartridges
Standard version 24:1
The systems are combined with a dispensing valve or an eccentric rotor pump for integration into assembly lines or
other automated work stations.
The system is designed as a two channel dispenser, allowing only one channel to be activated at a time.
Whenever channel 1 is empty, channel 2 will be automatically activated. At the same time, the changeover valve
must be switched to the relevant channel. As an option the twin cartridge dispenser can be equipped with two ball
valves for venting pressure from the feedlines. All electrical connectors are plugged into two (6-way) sensor interface
boxes used for communication with a higher ranking controller. The system is available for 300ml cartridges and
850ml cartridges.
Typical Fluids Handled: Medium and high viscosity anaerobics.
Twin Cartridge System for Two-Component Epoxies
This system is based on a pneumatically operated extrusion cylinder, a static mixing tube and a controller (97006).
To provide positive no-drip shut off, a Pinch Tube Valve (97141) attaches directly to the end of the mixer nozzle.
For better stability the static mixer can be fitted with a support tube. This system is capable of dispensing Loctite ®
products from 50ml, 200ml and 400ml twin cartridges. The system is engineered to deliver the correct mixing ratio.
An optional stand with mounting bracket is available for holding the cartridge system in place.
46