Hand-Held Applicators - Henkel Content Management System

Loctite ® 7700 Hand-held LED Light Source 395nm 98794/98591
The Loctite ® 7700 light sources are used for curing light cure products that respond to UVV cold light. They both include
a focussed LED light source.
The 98794 HD LED unit is designed for continuous use. It can be either hand-held or mounted in a fixed position.
Initiation is via a foot switch (97201) which must be ordered separately.
The 98591 is designed for intermittent use and is started by pressing a finger switch. It is powered by a rechargeable
battery.
UV Spot Cure System LED 365nm 97079/97079-4
This LED cure system is designed for curing Loctite® UV adhesives using UVA cold light at a wavelength in the range
of 365 nm. The basic configuration is equipped with one LED head and one condenser lens. As an option the unit can
be extended with 3 additional LED heads. The unit is designed for manual working stations and also for integration
into automatic production lines. The radiation cycle can be started with the START button on the front panel, with a
footswitch or via a PLC interface.
An optional sensor head is available for UV intensity measurement 8953856 (IDH No. 1305334).
Technical Specifications:
Power Supply 100-240V AC, 50/60 Hz Weight 1.3kg
Power Consumption max. 60VA Dimensions (W x H x D): 80 x 125 x 140mm
Typical LED life above 20,000 hours Cure Area ø 6mm
Operating Temperature
Range
+5°C to +35°C
Model: Item # IDH No. Item # IDH No.
1-channel, fully fitted 97079 1473952 4-channel, fully fitted 97079-4 on request
Features:
• LED life exceeds 20,000h
• Programmable intensity profile
• Locking key
• Connection for external
emergency stop
• UVA intensity up to 8000mW/cm²
• Compact and space saving
LED head design
• No warm-up required
• No thermal loading
UVA Wand System ECO 97058
This light source in combination with a liquid light guide is a simple, cost efficient spot light source for curing spots of
Loctite ® UV adhesives typically up to 12mm in diameter. It is particularly suitable for manual operation in small scale
productions and lab applications. The integrated reflector lamp unit combines high radiation output with low energy
consumption. For periodical monitoring of UVA radiation output it is highly recommended to use the UV Spot Radiometer
(see page 45).
Spot curing systems 97057 or 97034 (with additional emission of UVC light for fast surface cure) should be preferred for
fast processing cycles or where fully automated integration is required.
Technical Specifications:
Power Supply 230V AC, 50Hz Spectrum 310-500 nm
Power Consumption 120W Dimensions
215 x 160 x 255mm
(L x W x H)
Lamp Type
120 watt ultra-high pressure mercury
arc lamp
Weight
4.5kg
Features:
• High Intensity UVA and
blue light source
• Choice of UV wands
• Adjustable exposure time
up to 99.9s
• Bulb lifetime expectancy up
to 3000h
• Integrated hour meter
• Ideal for manual workstations
41