sivacon

Economical, Requirement-Oriented and Type-Tested:
the SIVACON Variable Low-Voltage Switchboard
Economical, requirement-oriented and
type-tested (TTA) – these are the identifying
features of the new low-voltage switchboard
from Siemens. SIVACON®is suitable for
all power levels: from the power centre
with a rating of 6300 A through main and
subdistribution boards to the motor control
centre, installed either in fixed-mounted,
plug-in or withdrawable unit design.
Modular technology
Every SIVACON assembly
is manufactured exclusively
from standardized and
series-produced modules
oriented to requirements.
All modules are type-tested
and incorporate high quality.
By virtue of a wide range of
possible module combinations,
justice is done to all
stipulations. Adaptations to
new performance demands
can be realized easily and
swiftly by simply replacing
or adding modules. The
advantages of the modular
concept are obvious:
• Type-testing provides proof
of safety and quality for each
installation
• All requirement profiles are
fulfilled with the high quality
of standard production
• Ordering of spares and
additions is easy and
delivery times are short
SIVACON offers
advantages that set
new standards
• Type-tested standard
modules (TTA)
• Space-saving base areas
from only 400 x 400 mm
• High packing density with
up to 40 feeders per cubicle
• Test and disconnected
position with door closed
• Visible isolating gaps and
points of contact
• Standard operator interface
for all withdrawable units
• Solid wall design for safe
cubicle-to-cubicle separation
• Alternative busbar
positioning at top or rear
• Cable or bar connection
from above or below
The SIVACON variable low-voltage switchboard
2