sivacon

In-Line Plug-In Design –
5Economical, Reliable, Versatile
The In-Line Plug-In design represents a low-priced
alternative to both the classic fixed-mounted
and the convenient withdrawable unit design.
By virtue of the supply-side plug-in contact, the
modules provide the facility for quick
interchangeability without the switchboard having
to be isolated. This design is therefore used
wherever changing requirements are imposed
on operation, if for example motor ratings have to
be changed or new loads connected.
The SIVACON In-Line Plug-In design offers
excellent economy, reliability and versatility.
• High degree of safety by
virtue of type-tested
standard modules (TTA)
• Supply-side plug-in contact
enables quick replacement
• Load feeders
up to 45 kW
• 3RV circuit-breaker units up
to 100 A
• High packing density (up to
35 feeders per cubicle)
• Protection against electric
shock from plug-on bus
system
• Auxiliary current plug
connector
• Lateral guide to ensure
positive contact
• With/without instrument
panel
• combinable with plug-in
fuse strips 3NJ6
• 400 mm wide cable
connection compartment
• Possible to replace a feeder
without having to shut
down the system
In-Line Plug-In design
combined with plug-in
fuse strips 3NJ6
18