D900A3 Automatic Ticket Dispenser USER MANUAL - Take A Number
D900A3 Automatic Ticket Dispenser USER MANUAL - Take A Number D900A3 Automatic Ticket Dispenser USER MANUAL - Take A Number
D900A3 AUTOMATIC LOADING TICKET ROLL ~ Continued 5. If the ticket feeder is not closed, push down on the feeder latch and slide the latch to the right to close. 6. Remove tickets with glue or torn edge to begin the ticket strip with a full ticket. Insert the first ticket under the back roller and feeder entry guide. 7. Press the manual feed switch to feed the ticket strip through the feeder. 8. If the ticket strip jams, open the feeder to pull out the jammed tickets. Press down on the feeder latch, slide it to the left to unlock it and lift the latch to open the feeder. SATO Labeling Solutions D900A3-6 www.satolabeling.com 2007
D900A3 AUTOMATIC SET STARTING TICKET NUMBER ~ L3 SYSTEM 1. After setting in a ticket roll, take a ticket WITH THE DISPENSER COVER STILL OPEN 2. Close the dispenser cover after taking a ticket 3. On system startup, the message ‘$dOL’ is displayed on K900 units, meaning that the $ (Service Type A…E) dispenser is Off-line (ex, ST=A). To take a dispenser Off-line manually for changing ticket roll, press and hold the D key for 3 seconds. 4. With ‘$dOL’ displayed, press the D key on a K900 that is logged on to the same Service Type. The K900 displays ‘$_ _ _’ (ex. ‘A_ _ _’). 5. Key in the start ticket number (Ex. ‘175’) and press the D key. SATO Labeling Solutions D900A3-7 www.satolabeling.com 2007
- Page 1 and 2: D900A3 AUTOMATIC USER MANUAL D900A3
- Page 3 and 4: D900A3 AUTOMATIC CONNECTIONS & SETT
- Page 5: D900A3 AUTOMATIC D90 TICKET TYPES ~
- Page 9: D900A3 AUTOMATIC TURN-O-MATIC CONTA
<strong>D900A3</strong> AUTOMATIC<br />
LOADING TICKET ROLL ~ Continued<br />
5. If the ticket feeder is not closed, push down on the feeder latch and slide the latch to<br />
the right to close.<br />
6. Remove tickets with glue or torn edge to begin the ticket strip with a full ticket.<br />
Insert the first ticket under the back roller and feeder entry guide.<br />
7. Press the manual feed switch to feed the ticket strip through the feeder.<br />
8. If the ticket strip jams, open the feeder to pull out the jammed tickets. Press down<br />
on the feeder latch, slide it to the left to unlock it and lift the latch to open the feeder.<br />
SATO Labeling Solutions<br />
<strong>D900A3</strong>-6<br />
www.satolabeling.com 2007