PROFESSIONAL MEASURING AND TEST INSTRUMENTS

CONTINUITY TESTER | TESTBOY 20 | Voltage-proof continuity tester
The Testboy 20 is a further development of the Testboy 2, the most-sold continuity tester in Germany.
Millions of satisfied customers are proof of the reliability of this instrument.
The non-contact voltage sensor detects AC voltages through the insulation. The capacitive method of measurement does
not require current to flow. Defective lamps in chains of Christmas tree lights or cable breaks are indicated precisely within
seconds. Furthermore, the electronics also support single-pole phase determination.
In addition to fulfilling the functions of a classic cable and continuity tester the Testboy 20 is also equipped with a highperformance
LED torch designed to provide up to 80 hours burn time.
Its dielectric strength up to 400 V makes this device unique!
To warn the user against touching hazardous live wires the presence of current is indicated by a glow lamp actuated by an
integrated current alarm.
Identifying wire pairs through continuity testing is a standard task for the Testboy 20.
Its simplicity of operation and suitability for a wide range of applications means the Testboy 20 is a must-have piece of
equipment for all electricians and service technicians.
Cable breaks and defective lamps are rapidly and precisely located and indicated with this easy-to-use device.
Your benefits:
| 5 year manufacturer's warranty
| IEC/EN 61010-1 (DIN VDE 0411)
SPECIFICATIONS
Technical data
Continuity testing
Test voltage
Test current
Power supply
Voltage proof
Degree of protection
Dimensions
Overvoltage category
Weight
Colour
Scope of delivery
Accessories (optional)
Testboy 20
Optical 0 - 20Ω
Acoustic 0 - 250Ω
4.5V
Optical ~ 10mA
Acoustic ~ 2mA
3x 1.5V
Up to 400V
IP 44
120 x 60 x 30 mm
CAT III 400V
90g (without battery)
Red, other colours on request
1x operating instructions
2x test leads
Alligator clip
Carry case
LED
Voltage
proof
V
Non-contact
Acoustic
Optical
5
Year
Warranty
19 |