PROFESSIONAL MEASURING AND TEST INSTRUMENTS
PROFESSIONAL MEASURING AND TEST INSTRUMENTS
PROFESSIONAL MEASURING AND TEST INSTRUMENTS
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
VOLTAGE <strong>TEST</strong>ER | <strong>TEST</strong>BOY PROFI LED PLUS | Two-pole voltage tester<br />
Thanks to its wide performance spectrum the Testboy Profi LED Plus is one of the more sought-after products in our assortment.<br />
The Testboy Profi LED Plus combines the following seven functions in a single device:<br />
| Displays AC and DC voltages from 6 to 1000 V<br />
| Single-pole phase testing<br />
| Two-pole phase sequence testing<br />
| Continuity testing up to 500kΩ (acoustic/optical)<br />
| Two-button fault current/RCD test<br />
| LED torch (white)<br />
| Screw-off 4mm test tips adapter<br />
The combination of high-quality materials used for the watertight housing and the rubber grip underline the professional<br />
appearance of this instrument. The display window is protected by an unbreakable plastic cover.<br />
Even when used daily the robust construction as well as the dust and waterproof housing guarantee a long service life.<br />
The test tips are protected by a removable cap that in turn is attached to the device. Moreover, the use of LEDs to provide<br />
optical indication across all functions guarantees the highest levels of reliability.<br />
An acoustic signal is emitted to signalise a hazardous voltage when a 35V AC/DC voltage or above is detected.<br />
Pushbutton load connection prevents unwanted tripping of the RCD, and ensures measurements of the protective earth<br />
conductor can also be undertaken. An acoustic signal is emitted during continuity testing from 0 to 500 kΩ.<br />
Your benefits:<br />
| 5 year manufacturer's warranty<br />
| IEC/EN 61243-3 (DIN VDE 0682-401)<br />
SPECIFICATIONS<br />
Technical data<br />
Display<br />
Operating panel<br />
Measurement ranges<br />
Voltage range<br />
Continuity testing<br />
Phase indication<br />
Pushbutton load connection<br />
Power supply<br />
Overvoltage category<br />
Dimensions<br />
Degree of protection<br />
Weight<br />
Colour<br />
Scope of delivery<br />
Accessories (optional)<br />
Testboy Profi LED Plus<br />
Optical, 12 LEDs<br />
Finger tip / RCD button<br />
Autoranging<br />
6 - 1000V AC/DC, 0 - 400Hz<br />
0 - 500kΩ with acoustic signal<br />
> 100V AC<br />
Is ~ 30mA ED (DT) = 30 sec.<br />
2x 1.5V<br />
CAT IV 1000V<br />
238 x 70 x 30 mm<br />
IP 65<br />
200 g<br />
Red/black, other colours on request<br />
1x operating instructions<br />
2x batteries type AAA LR03<br />
Carry case<br />
LED<br />
6-1000V<br />
AC/DC<br />
Phase<br />
sequence<br />
Optical<br />
Acoustic<br />
5<br />
Year<br />
Warranty<br />
| 14