MILITARY - Lind Electronics
MILITARY - Lind Electronics
MILITARY - Lind Electronics
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
<strong>Lind</strong> <strong>Electronics</strong>, Inc.<br />
Power Specialists for Mobile Computing<br />
<strong>Lind</strong> <strong>Electronics</strong>, Inc.<br />
Power Specialists for Mobile Computing<br />
MIL-STD Laptop Power<br />
Adapters<br />
Dual USB Output DC/DC<br />
Adapter<br />
Power your devices using different military<br />
power sources.<br />
Simultaneoulsy charge 2 USB-powered devices<br />
using different power sources.<br />
The <strong>Lind</strong> MIL-STD Laptop Power Adapters offer a rugged design for<br />
meeting MIL-STD461E, MIL-STD1275B and MIL-STD810F electrical<br />
and environmental standards.<br />
The MIL-STD Laptop Power Adapters provide continuous rated<br />
power output and are available for most laptop models. These<br />
adapters offer an 11 - 32 VDC input power range and are epoxy<br />
sealed in an aluminum extrusion to withstand the harshest military<br />
environments. Input power is provided via a NATO Slave connector,<br />
BA-5590 battery, cigarette lighter input cable or other specific<br />
connection.<br />
The MIL-STD Laptop Power Adapters come available in standard<br />
cable lengths, or custom cable lengths may be made to order<br />
upon request.<br />
Mil-Std Laptop Power Adapter<br />
The <strong>Lind</strong> Dual USB Output DC/DC Adapter allows you to charge<br />
your low-power devices via USB using one of three different input<br />
cable options: a NATO Slave input cable; an input cable with a<br />
BA-5590 or BB-2590 military battery connector; or a cigarette<br />
lighter input cable.<br />
The Dual USB Output DC/DC Adapter provides a regulated DC<br />
output for charging mobile phones, MP3 players, digital cameras,<br />
and other mobile devices using a USB power connection.<br />
<strong>Lind</strong>’s Dual USB Output DC/DC Adapter is housed in a rugged<br />
aluminum extrusion for greater durability. The internal components<br />
are epoxy sealed to resist against shock, vibration and dust.<br />
Dual USB Output DC/DC Power Adapter<br />
DC Input Specifications: MIL-STD Laptop Power Adapters<br />
• Input: 11 to 32 VDC<br />
• EMI/RFI Characteristics: Meets MIL-STD461E, CE101,<br />
CE102, CS101, CS114, CS115, CS116, RE101, RE102,<br />
RS101, RS103<br />
• Input Transient Protection: Meets MIL-STD1275D,<br />
Voltage Surge +100 VDC, Voltage Spike +/-250 VDC<br />
• Low Input Voltage Shutdown: Auto Recovery<br />
• High Input Voltage Shutdown: Auto Recovery<br />
• Load Dump Protection: Meets ISO 7637<br />
• Reverse Polarity: Auto Recovery<br />
DC Output Specifications: MIL-STD Laptop Power Adapters<br />
• Output Voltage: 12-24 VDC Factory Set (See unit label)<br />
• Short Circuit Protection: Auto Recovery<br />
• Isolation Voltage: Input to Output Non-isolated, 100 VDC<br />
Output to Case<br />
• Noise and Ripple: Meets MIL-STD-1275D and<br />
MIL-STD461E CE102<br />
Environmental Specifications: MIL-STD Laptop Power Adapters<br />
14<br />
• Storage Temperature: -40º to +80º<br />
• High Temperature: Meets MIL-STD-810F, Method<br />
501.4<br />
• Low Temperature: Meets MIL-STD-810F, Method<br />
502.4<br />
• Temperature Shock: Meets MIL-STD-810F, Method<br />
503.4<br />
• Shock: Meets MIL-STD-810F, Method 516.5, Procedure I<br />
• Altitude: MIL-STD-810F, method 500.4, Proc. II<br />
• Vibration: Meets MIL-STD-810F, Method 514.5,<br />
Procedure I, Category 20 Ground Vehicles<br />
• Humidity: Meets MIL-STD-810F, Method 507.4<br />
• Sand and Dust: Meets MIL-STD-810F, Method 510.4<br />
• Enclosure: Extruded aluminum<br />
• Finish: Black Anodized<br />
• Weight: 32 ounces (.7kg)<br />
• Dimensions: 9.18 x 2.98 x 1.14 inches (23.3 x 7.6 x<br />
2.9 cm)<br />
• Mounting Hole Size: .20 inch (5.1 mm)<br />
Features: Dual USB Output DC/DC Adapter<br />
• Simultaneously power up to 2 USB devices<br />
• 3 different input cable options<br />
• Output Current Limit Protection<br />
Technical Information: Dual USB Output DC/DC Adapter<br />
• Regulated DC output for charging USB devices<br />
• Rugged aluminum extrusion<br />
• Epoxy sealed components<br />
• Power Input: 12 - 32 VDC • Power Output: 5V 500m amps each<br />
15<br />
USA Office: 6414 Cambridge Street • Minneapolis, MN 55426 • 952.927.6303 • 952.927.7740 (Fax) • www.lindelectronics.com • info@lindelectronics.com<br />
European Office: Asternweg 4/2 • 73765 Neuhausen, Germany • +49 7158 987 5460 • +49 7158 987 5416 (Fax) • meisele@lindelectronics.com