Catalyst 6500 Series Switches Installation Guide - Ipland
Catalyst 6500 Series Switches Installation Guide - Ipland Catalyst 6500 Series Switches Installation Guide - Ipland
Catalyst 6509-NEB Switch Chapter 1 Product Overview Table 1-15 Catalyst 6509-NEB Switch Features (continued) Feature Features Modules • Supports up to eight Catalyst 6500 series modules. • WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules must be installed in slot 5 or slot 6. Note Mixing WS-C6500-SFM and WS-X6500-SFM2 Switch Fabric Modules in the Catalyst 6509-NEB chassis is allowed. • Some Catalyst 6500 series modules may: – Not be supported – Require that you install a Supervisor Engine 720 – Have chassis slot restrictions – Require a specific software release level to operate Note Check your software release notes for specific information. Backplane bandwidth • 32 GBps shared bus. • 256 GBps switch fabric. • 720 GBps switch fabric. Clock and VTT modules • Two replaceable clock modules (WS-C6K-CL=) provide clocking signals to the EOBC channel and the switching bus. • Three replaceable voltage termination (VTT) modules (WS-C6K-VTT=) provide reference voltage for bus signals. 1-44 Catalyst 6500 Series Switches Installation Guide OL-5781-08
Chapter 1 Product Overview Catalyst 6509-NEB Switch Table 1-15 Catalyst 6509-NEB Switch Features (continued) Feature Features Fan tray • The chassis supports one hot-swappable fan tray. Two fan tray models are available: Note – WS-C6509-NEB-FAN (Standard fan tray—294 CFM). Supports Supervisor Engine 1 and Supervisor Engine 2 only; does not support Supervisor Engine 32, Supervisor Engine 32 PISA, Supervisor Engine 720, or Supervisor Engine 720-10GE. – WS-6509-NEB-UPGRD 1 —630 CFM (The high-speed fan tray (WS-C6509-NEB-FAN2) is a part of the upgrade kit). This kit must be installed if you are installing a Supervisor Engine 32 or a Supervisor Engine 720 in the Catalyst 6509-NEB switch. The kit contains a high-speed fan tray, back panel, and power harness. If you are operating the chassis from an AC source, you will also need to order a 3000 W AC-input power supply which has a front panel DC power connector. The upgrade kit fan tray receives 42 VDC power from this front panel DC power connector through a power harness also provided in the upgrade kit. If you are operating the chassis from a DC source, you can power the system with either the 2500 W or 4000 W DC-input power supplies and power the upgrade fan tray from the site source DC. Both fan tray models contain nine individual fans. The individual fans are not field replaceable; you must replace the fan tray in the event of a fan failure. • Fan tray STATUS LED – Red—One or more individual fans have failed. – Green—Fan tray is operating normally. OL-5781-08 Catalyst 6500 Series Switches Installation Guide 1-45
- Page 14 and 15: Conventions Preface Warnings use th
- Page 16 and 17: Conventions Preface Varning! VIKTIG
- Page 18 and 19: Conventions Preface xviii Catalyst
- Page 20 and 21: Related Documentation Preface Obtai
- Page 22 and 23: WS-SUP32-GE-3B Catalyst 6503 Switch
- Page 24 and 25: Catalyst 6503 Switch Chapter 1 Prod
- Page 26 and 27: Catalyst 6503 Switch Chapter 1 Prod
- Page 28 and 29: WS-SUP32-GE-3B Catalyst 6503-E Swit
- Page 30 and 31: Catalyst 6503-E Switch Chapter 1 Pr
- Page 32 and 33: Catalyst 6503-E Switch Chapter 1 Pr
- Page 34 and 35: Catalyst 6504-E Switch Chapter 1 Pr
- Page 36 and 37: Catalyst 6504-E Switch Chapter 1 Pr
- Page 38 and 39: WS-X6408 8 PORT GIGABIT ETHERNET WS
- Page 40 and 41: Catalyst 6506 Switch Chapter 1 Prod
- Page 42 and 43: Catalyst 6506 Switch Chapter 1 Prod
- Page 44 and 45: WS-X6408 8 PORT GIGABIT ETHERNET WS
- Page 46 and 47: Catalyst 6506-E Switch Chapter 1 Pr
- Page 48 and 49: Catalyst 6506-E Switch Chapter 1 Pr
- Page 50 and 51: WS-X6408 WS-X6408 WS-X6408 WS-X6408
- Page 52 and 53: Catalyst 6509 Switch Chapter 1 Prod
- Page 54 and 55: Catalyst 6509 Switch Chapter 1 Prod
- Page 56 and 57: WS-X6408 WS-X6408 WS-X6408 WS-X6408
- Page 58 and 59: Catalyst 6509-E Switch Chapter 1 Pr
- Page 60 and 61: Catalyst 6509-E Switch Chapter 1 Pr
- Page 62 and 63: FAN STATUS LINK LINK LINK LINK LINK
- Page 66 and 67: Catalyst 6509-NEB Switch Chapter 1
- Page 68 and 69: Catalyst 6509-NEB Switch Chapter 1
- Page 70 and 71: Catalyst 6509-NEB-A Switch Chapter
- Page 72 and 73: Catalyst 6509-NEB-A Switch Chapter
- Page 74 and 75: Catalyst 6509-NEB-A Switch Chapter
- Page 76 and 77: Catalyst 6509-V-E Switch Chapter 1
- Page 78 and 79: Catalyst 6509-V-E Switch Chapter 1
- Page 80 and 81: Catalyst 6509-V-E Switch Chapter 1
- Page 82 and 83: Catalyst 6513 Switch Chapter 1 Prod
- Page 84 and 85: Catalyst 6513 Switch Chapter 1 Prod
- Page 86 and 87: Catalyst 6513 Switch Chapter 1 Prod
- Page 88 and 89: WS-X6408 8 PORT GIGABIT ETHERNET WS
- Page 90 and 91: Catalyst 6513-E Switch Chapter 1 Pr
- Page 92 and 93: Catalyst 6513-E Switch Chapter 1 Pr
- Page 94 and 95: Catalyst 6513-E Switch Chapter 1 Pr
- Page 96 and 97: Safety Chapter 2 Preparing for Inst
- Page 98 and 99: Site Requirements Chapter 2 Prepari
- Page 100 and 101: WS-X6K-SUP2-2GE OSM-4OC12 POS-SI 4
- Page 102 and 103: WS-X6K-SUP2-2GE SUPERVISOR2 WS-X6K-
- Page 104 and 105: WS-X6K-SUP2-2GE SUPERVISOR2 WS-X6K-
- Page 106 and 107: 1 2 3 4 5 6 7 8 9 10 1 1 2 12 3 4 5
- Page 108 and 109: WS-X6408 8 PORT GIGABIT ETHERNET WS
- Page 110 and 111: Site Requirements Chapter 2 Prepari
- Page 112 and 113: Site Requirements Chapter 2 Prepari
<strong>Catalyst</strong> 6509-NEB Switch<br />
Chapter 1<br />
Product Overview<br />
Table 1-15<br />
<strong>Catalyst</strong> 6509-NEB Switch Features (continued)<br />
Feature<br />
Features<br />
Modules • Supports up to eight <strong>Catalyst</strong> <strong>6500</strong> series modules.<br />
• WS-C<strong>6500</strong>-SFM and WS-X<strong>6500</strong>-SFM2 Switch Fabric Modules must be<br />
installed in slot 5 or slot 6.<br />
Note<br />
Mixing WS-C<strong>6500</strong>-SFM and WS-X<strong>6500</strong>-SFM2 Switch Fabric<br />
Modules in the <strong>Catalyst</strong> 6509-NEB chassis is allowed.<br />
• Some <strong>Catalyst</strong> <strong>6500</strong> series modules may:<br />
– Not be supported<br />
– Require that you install a Supervisor Engine 720<br />
– Have chassis slot restrictions<br />
– Require a specific software release level to operate<br />
Note Check your software release notes for specific information.<br />
Backplane bandwidth • 32 GBps shared bus.<br />
• 256 GBps switch fabric.<br />
• 720 GBps switch fabric.<br />
Clock and VTT modules • Two replaceable clock modules (WS-C6K-CL=) provide clocking<br />
signals to the EOBC channel and the switching bus.<br />
• Three replaceable voltage termination (VTT) modules<br />
(WS-C6K-VTT=) provide reference voltage for bus signals.<br />
1-44<br />
<strong>Catalyst</strong> <strong>6500</strong> <strong>Series</strong> <strong>Switches</strong> <strong>Installation</strong> <strong>Guide</strong><br />
OL-5781-08