Catalyst 6500 Series Switches Installation Guide - Ipland

3000 W AC-Input Power Supply
Appendix A
Power Supply Specifications
Table A-25
3000 W Power Supply Specifications (continued)
Specification
Power supply output • 100/120 VAC operation
Front panel power
connector
Output holdup time
kVA rating 1
Heat dissipation
Weight
Description
– 25.0 A @ +3.3 V
– 5 A @ +5 V
– 12 A @ +12 V
– 27.89 A @ +42 V
• 200/240 VAC operation
– 25.0 A @ +3.3 V
– 5 A @ +5 V
– 12 A @ +12 V
– 65.98 A @ +42 V
A two-pin male Molex connector is located in the lower right corner of
the power supply front panel. The connector provides 42 VDC at a
maximum of 17 A. This connector provides power to the
WS-6509-NEB-UPGRD kit fan assembly through a power harness also
provided in the kit. A hinged protective flap secured by a captive screw
covers the connector when it is not in use.
20 ms minimum
3520 W (total input power) or 3.6 KVA (high-line operation)
12,046 BTU/hour (approx.)
15.8 lb (7.2 kg)
1. The kVA rating listed for the power supply should be used as the sizing criteria for both UPS outputs as well as standard
circuits and transformers to power a switch.
Table A-26 lists the power supply LEDs and their meanings.
A-38
Catalyst 6500 Series Switches Installation Guide
OL-5781-08