Catalyst 6500 Series Switches Installation Guide - Ipland

2700 W AC-Input and DC-Input Power Supplies
Appendix A
Power Supply Specifications
Table A-21
2700 W AC-Input Power Supply Specifications (continued)
Specification
Power supply output • 100/120 VAC operation
Output holdup time
kVA rating 1
Heat dissipation
Weight
Description
– 15 A @ +1.5 VDC
– 2.5 A @ +3.3 VDC
– 27.49 A @ +50 VDC
• 200/240 VAC operation
– 15 A @ +1.5 VDC
– 2.5 A @ +3.3 VDC
– 55.61 A @ +50 VDC
20 ms minimum
3.4 KVA (high-line operation)
11,238 BTU/hour (approx.)
18.5 lb (8.4 kg)
1. The kVA rating listed for the power supply should be used as the sizing criteria for both UPS outputs as well as standard
circuits and transformers to power a switch.
Table A-22 lists the 2700 W DC-input power supply specifications.
Table A-22
2700 W DC-Input Power Supply Specifications
Specification
Description
DC-input voltage • –48 VDC @ 37 A for nominal –48 V battery backup system
(operating range: –40.5 VDC to –56 VDC)
DC-input current (per DC
input)
Power supply output
capacity
• –60 VDC @ 29 A for nominal –60 V battery backup system
(operating range: –55 VDC to –72 VDC)
• 43 A @ –40.5 VDC
• 37 A @ –48 VDC
• 29 A @ –60 VDC
Note For multiple DC input power supplies, each DC input must be
protected by a dedicated circuit breaker or a fuse. The circuit
breaker or the fuse must be sized according to the power supply
input power rating and any local or national electrical code
requirements.
• 1350 W maximum (–48 to –60 VDC, with one DC input)
• 2700 W maximum (–48 to –60 VDC, with two DC inputs)
A-32
Catalyst 6500 Series Switches Installation Guide
OL-5781-08