Catalyst 6500 Series Switches Installation Guide - Ipland
Catalyst 6500 Series Switches Installation Guide - Ipland Catalyst 6500 Series Switches Installation Guide - Ipland
950 W AC-Input and DC-Input Power Supplies Appendix A Power Supply Specifications Table A-4 lists the specifications for the 950 W DC-input power supply. Table A-4 950 W DC-Input Power Supply Specifications Specification DC-input voltage Description –48 VDC to –60 VDC continuous DC-input current • 28 A @ –48 VDC Power supply output capacity • 23 A @ –60 VDC 950 W Power supply output • 15 A @ +1.5 VDC Output holdup time Heat dissipation Weight • 2.5 A @ +3.3 VDC • 19.15 A @ +50 VDC 8 ms 4632 BTU/hour (approx.) 8.4 lb (3.8 kg) Table A-5 lists the power supply LEDs and their meanings. Table A-5 LED INPUT OK FAN OK OUTPUT FAIL 950 W AC-Input and DC-Input Power Supply LEDs Meaning AC-input power supplies: • Green—Source AC voltage is OK. (Input voltage is 85 VAC or greater.) • Off—Source AC voltage falls below 70 VAC, is not present, or the PEM is turned off. DC-input power supplies: • Green—Source DC voltage is OK. (–40.5 VDC or greater.) • Off—Source DC voltage falls below –33 VDC or is not present at the PEM. Green—Power supply fan is operating properly. Off—Power supply fan failure is detected. Red—Problem with one or more of the DC-output voltages of the power supply is detected. Off—DC-output voltages within acceptable margins. Note For proper operation of the OUTPUT FAIL LED, systems with single power supplies must be configured with a minimum of one fan tray and one supervisor engine. Systems with dual power supplies must have a minimum configuration of one fan tray, one supervisor engine, and one additional module. Failure to meet these minimum configuration requirements can cause a false power supply output fail signal. A-8 Catalyst 6500 Series Switches Installation Guide OL-5781-08
Appendix A Power Supply Specifications 950 W AC-Input and DC-Input Power Supplies 950 W Power Supply AC Power Cords Table A-6 lists the 950 W AC-input power supply AC power cords specifications. These power cords plug into the 950 W PEM(PEM-15A-AC), not directly into the power supply. The table includes references to power cord illustrations. Note All 950 W power supply power cords are 8 feet 2 inches (2.5 meters) in length. Note All 950 W power supply power cords have an IEC60320/C15 appliance connector at one end. The appliance connector has a 90° left bend. Table A-6 950 W AC-Input Power Supply Power Cords Locale Power Cord Part Number AC Source Plug Type Cordset Rating Power Cord Reference Illustration Argentina CAB-7KACR= IRAM 2073 10 A, 250 VAC Figure A-25 Australia, New Zealand CAB-AC10A-90L-AU= SAA AS 3112 10 A, 250 VAC Figure A-20 Continental Europe CAB-AC10A-90L-EU= CEE 7/7 10 A, 250 VAC Figure A-21 Italy CAB-AC10A-90L-IT= CEI 23-16/7 10 A, 250 VAC Figure A-22 Japan, North America CAB-AC15A-90L-US= NEMA 5-15 15 A, 125 VAC Figure A-23 United Kingdom CAB-AC10A-90L-UK= BS 1363 1 10 A, 250 VAC Figure A-24 1. Plug contains a 13 A fuse. OL-5781-08 Catalyst 6500 Series Switches Installation Guide A-9
- Page 266 and 267: CISCO SYSTEMS, INC Removing and Ins
- Page 268 and 269: CISCO SYSTEMS, INC 1 2 3 4 INPUT OK
- Page 270 and 271: Removing and Installing the DC-Inpu
- Page 272 and 273: CISCO SYSTEMS, INC Removing and Ins
- Page 274 and 275: Removing and Installing the DC-Inpu
- Page 276 and 277: Removing and Installing the DC-Inpu
- Page 278 and 279: Removing and Installing the DC-Inpu
- Page 280 and 281: CISCO SYSTEMS, INC 1 2 3 4 INPUT OK
- Page 282 and 283: Removing and Installing PEMs Chapte
- Page 284 and 285: Removing and Installing PEMs Chapte
- Page 286 and 287: OSM-4OC12 POS-SI 1 2 1 2 1 1 2 2 3
- Page 288 and 289: Removing and Installing the Fan Tra
- Page 290 and 291: WS-X6K-SUP2-2GE OSM-4OC12 POS-SI OS
- Page 292 and 293: WS-X6K-SUP2-2GE SUPERVISOR2 WS-X6K-
- Page 294 and 295: WS-C6500-SFM SWITCH FABRIC MDL WS-C
- Page 296 and 297: WS-X6K-SUP2-2GE SUPERVISOR2 WS-X6K-
- Page 298 and 299: Removing and Installing the Fan Tra
- Page 300 and 301: ACTIVE TX RX RX TX ACTIVE TX RX RX
- Page 302 and 303: Installing the Air Filter Assembly
- Page 304 and 305: Installing the Remote Power Cycling
- Page 306 and 307: Installing the Remote Power Cycling
- Page 308 and 309: Installing the Remote Power Cycling
- Page 310 and 311: Power Supply Compatibility Matrix A
- Page 312 and 313: Power Supply Compatibility Matrix A
- Page 314 and 315: 950 W AC-Input and DC-Input Power S
- Page 318 and 319: 1000 W AC-Input Power Supply Append
- Page 320 and 321: 1000 W AC-Input Power Supply Append
- Page 322 and 323: 1300 W AC-Input and DC-Input Power
- Page 324 and 325: 1300 W AC-Input and DC-Input Power
- Page 326 and 327: 1400 W AC-Input Power Supply Append
- Page 328 and 329: 1400 W AC-Input Power Supply Append
- Page 330 and 331: 1400 W AC-Input Power Supply Append
- Page 332 and 333: 2500 W AC-Input and DC-Input Power
- Page 334 and 335: 2500 W AC-Input and DC-Input Power
- Page 336 and 337: 2500 W AC-Input and DC-Input Power
- Page 338 and 339: 2700 W AC-Input and DC-Input Power
- Page 340 and 341: 2700 W AC-Input and DC-Input Power
- Page 342 and 343: 2700 W AC-Input and DC-Input Power
- Page 344 and 345: 3000 W AC-Input Power Supply Append
- Page 346 and 347: 3000 W AC-Input Power Supply Append
- Page 348 and 349: 3000 W AC-Input Power Supply Append
- Page 350 and 351: 4000 W AC-Input and DC-Input Power
- Page 352 and 353: 4000 W AC-Input and DC-Input Power
- Page 354 and 355: 6000 W AC-Input and DC-Input Power
- Page 356 and 357: 6000 W AC-Input and DC-Input Power
- Page 358 and 359: 6000 W AC-Input and DC-Input Power
- Page 360 and 361: 6000 W AC-Input and DC-Input Power
- Page 362 and 363: 8700 W AC-Input Power Supply Append
- Page 364 and 365: 8700 W AC-Input Power Supply Append
Appendix A<br />
Power Supply Specifications<br />
950 W AC-Input and DC-Input Power Supplies<br />
950 W Power Supply AC Power Cords<br />
Table A-6 lists the 950 W AC-input power supply AC power cords specifications. These power cords<br />
plug into the 950 W PEM(PEM-15A-AC), not directly into the power supply. The table includes<br />
references to power cord illustrations.<br />
Note<br />
All 950 W power supply power cords are 8 feet 2 inches (2.5 meters) in length.<br />
Note<br />
All 950 W power supply power cords have an IEC60320/C15 appliance connector at one end. The<br />
appliance connector has a 90° left bend.<br />
Table A-6<br />
950 W AC-Input Power Supply Power Cords<br />
Locale<br />
Power Cord<br />
Part Number<br />
AC Source Plug Type Cordset Rating Power Cord<br />
Reference<br />
Illustration<br />
Argentina CAB-7KACR= IRAM 2073 10 A, 250 VAC Figure A-25<br />
Australia, New Zealand CAB-AC10A-90L-AU= SAA AS 3112 10 A, 250 VAC Figure A-20<br />
Continental Europe CAB-AC10A-90L-EU= CEE 7/7 10 A, 250 VAC Figure A-21<br />
Italy CAB-AC10A-90L-IT= CEI 23-16/7 10 A, 250 VAC Figure A-22<br />
Japan, North America CAB-AC15A-90L-US= NEMA 5-15 15 A, 125 VAC Figure A-23<br />
United Kingdom CAB-AC10A-90L-UK= BS 1363 1<br />
10 A, 250 VAC Figure A-24<br />
1. Plug contains a 13 A fuse.<br />
OL-5781-08<br />
<strong>Catalyst</strong> <strong>6500</strong> <strong>Series</strong> <strong>Switches</strong> <strong>Installation</strong> <strong>Guide</strong><br />
A-9
Change language