Catalyst 6500 Series Switches Installation Guide - Ipland

Chapter 3
Installing the Switch
Chassis Installation Kits and Cable Guides
Table 3-2
Chassis Installation Kits and Cable Guides (continued)
Chassis
Installation Kits and Cable Guides
Catalyst 6509-NEB-A • Standard 19-inch rack-mount L brackets (factory-installed on the
chassis). Associated rack-mounting hardware is included in the
accessory kit.
• 3 RU rack-mount shelf kit is included in the accessory kit.
• One 9-slot vertical chassis cable management system is included in
the accessory kit.
Catalyst 6509-V-E • Standard 19-inch rack-mount L brackets (factory-installed on the
chassis). Associated rack-mounting hardware is included in the
accessory kit.
Catalyst 6513 or
Catalyst 6513-E
• 3 RU rack-mount shelf kit is included in the accessory kit.
• One cable management system is included in the accessory kit.
• Standard 19-inch rack-mount L brackets (factory-installed on the
chassis). Associated rack-mounting hardware is included in the
accessory kit.
• 3 RU rack-mount shelf kit is included in the accessory kit.
• Stabilizer bracket installation kit is included in the accessory kit.
(The kit is required when installing the chassis as a freestanding
unit.)
• Two 13-slot cable management guides are included in the
accessory kit.
Note
An optional center rack-mount kit for 23-inch, telco-style racks
is available for this chassis. The kit is not included as part of the
standard accessory kit, but is available as a separately orderable
item (WS-6513-RACK-MNT=). Installation instructions are
included with the kit.
OL-5781-08
Catalyst 6500 Series Switches Installation Guide
3-7